To open a toolbar
To open a toolbar as a free-standing group
| 4 | Right-click a tool palette button with a linked tool palette. The linked tool palette opens. |
See: Themes.
To open a toolbar
To open a toolbar as a free-standing group
| 4 | Right-click a tool palette button with a linked tool palette. The linked tool palette opens. |
See: Themes.
Create a blend surface between two surfaces with continuity control.
Create a ruled surface between two surface edges.
在维持节点结构的情况下，通过增减曲线或曲面的控制点数量以变更曲线或曲面的阶数。
Extend surface edges to meet and trims the surfaces to each other.
Evaluate surface curvature using false-color analysis.
连结至曲面分析工具列
Turn off curvature analysis display.
Evaluate curve or surface curvature with a graph.
Turn off curvature graph display.
Divide a surface into separate parts at kinks.
调整曲线端点或曲面未修剪边缘处的形状。
Lengthen a surface by a value.
Create a constant-radius round surface between two surfaces.
Reduce the number of surface control points.
Make the object knot vectors uniform without changing the control point locations.
使曲面的 U 或 V 方向的节点参数间距一致化。
Adjust a surface edge to have continuity with another surface edge.
可以同时衔接一个以上的边缘。
Combine two surfaces at untrimmed edges.
Copy a surface parallel to the original.
Display curve and surface control points.
连结至点的编辑工具列
以设定的阶数与控制点数重建曲线、曲面或挤出物件。
Restore surface edges to their surface.
Reconstruct surfaces to a specified control point number in the u- or v-directions.
Untrim selected surface edges.
Remove multiple knots from curves and surfaces.
Set the tangent direction of an untrimmed surface.
Highlight edges of surfaces and polysurfaces. Displays the Edge Analysis control.
连结至边缘工具工具列
Turn off edge display.
Contract the underlying untrimmed surface close to trimming boundaries.
Contract the underlying untrimmed surface as close as possible to the trimming boundaries.
Flatten a surface without restriction to single-directional curvature.
Change the location where the start and end edges meet on a closed surface.
将曲线或曲面镜像，并使两个曲面以设定的连续性相接。
Create intermediate surfaces between two input surfaces.
Flatten (develop) a surface or polysurface with curvature in one direction to a planar surface.
Project surface edges onto the construction plane to create planar curves.
Create a chamfer surface between surface edges with varying distance values.
Create a round tangent surface between two surface edges with varying radius values.
在两个曲面之间建立不等距的混接曲面。
Copy a surface specified varying distances from the original surface.
ChangeDegree
