Lights
Toolbar | Menu | Panel Gear Menu |
---|---|---|
|
Render Panels Lights Panels Lights |
Lights |
The Lights command opens the Lights panel.
Lights Panel
Name
The lighting object names. Double-click a lighting item in the panel to access more settings in the Properties or Sun panels.
See: Naming conventions in Rhino
Skylight
Provides an overall lighting effect.
Sun
Provides a strong, directional lighting effect depending on the settings in the Sun panel.
- Double-click the Sun to open the Sun panel.
- Double-click the Skylight to open the Rendering panel.
- Double-click a light to open the light properties.
Isolate
Turn on the lights with the checkbox checked, all other lights will be turned off. Clearing all checkboxes turns on all lights.
Type
Displays the light type.
Intensity
The brightness of the light.
Color
The light's illuminating color.
Layer
The light's layer.
Options
Add a new light
Click to select a light type and pick points in the viewport to place the light.
Show lights on layers that are off
Displays the lights in the list when their layers are turned off.
Light selection to viewport
Selecting a light in the list also selects the light in viewports.
Show groups
Displays light groups in the list.
Right-click context menu
Turn On/Off
Turns the selected lights on or off.
Delete
Deletes the selected lights. Sun and Skylight cannot be deleted.
Properties
Edits the selected light in the Properties panel.
UnIsolate All
Unchecks all Isolate checkboxes to turn on all lights.
Group
Groups the selected lights.
UnGroup
Ungroups the lights in the selected group.
Edit
Edits the light's name.
Color
Sets the color of the light. Setting the color to shades of gray dims the light.
On
Turns the light on or off.
Intensity
Controls the brightness of the light.
Drag the slider beyond the right end to increase the range of intensity above 100%.
Shadow intensity
Controls the softness of the shadow cast by the light.
Shadow intensity changes:
- size of a spotlight, point light, and rectangular light.
- angular diameter of a directional light.
- radius of a linear light.
Spotlight hardness (Spotlights only)
Controls the blurriness of the light spot edge.
Falloff (Except for directional lights)
Specifies how lighting intensity changes when light travels in the scene.
Constant
Distance has no effect to light intensity.
Linear
Light intensity decreases in a constant rate.
Inverse Squared
Light intensity decreases with the Inverse-Square Law (1/d2).
See also
Snapshots
The Snapshots command saves and restores Named Views, Named Positions, Layer States, as well as rendering settings, object settings including locked/hidden state, display mode, material, position, light settings, curve piping, displacement, edge softening, shutlining, and thickness.
Toolbar | Menu |
---|---|
|
Render Create Directional Light |
The DirectionalLight command inserts a light that simulates the sun defined with parallel rays and a direction.
Steps
- Pick a location at which to aim the directional light.
- Pick a location for the directional light.
- A directional light shines toward a specified direction. The location of the light does not matter: the light object merely indicates the direction the light shines.
- Turn on the light's control points and move or drag the control points to edit the light's direction and target.
- To move the light without changing its direction, move the dolly point (the control point at the midpoint on the direction vector).
Toolbar | Menu |
---|---|
|
Render Create Linear Light |
The LinearLight command inserts a light that imitates a fluorescent tube.
Steps
- Pick the start of the light.
- Pick the end of the light.
- In a rendered (openGL) viewport, linear lights are represented by point lights. Rotating or scaling linear lights will not affect lighting in the Rendered viewport.
Toolbar | Menu |
---|---|
|
Render Create Point Light |
The PointLight command inserts a light object that emits light from a single location in all directions (omni light).
Steps
- Pick the light's location.
Toolbar | Menu |
---|---|
|
Render Create Rectangular Light |
The RectangularLight command inserts a rectangular light object that emits light from an array of light points in one direction.
- Turn on the light's control points and move or drag the control points to edit the light's direction, length, width, and target.
- To move the light without changing its direction, move the dolly point (the control point at the midpoint on the direction vector).
- In a rendered (openGL) viewport, rectangular lights are represented by point lights. Rotating or scaling rectangular lights will not affect lighting in the Rendered viewport.
Steps
- Pick the light's start point.
- Pick a the light's length.
- Pick the light's width.
Command-line option
Target
Aims the light at the specified location.
Toolbar | Menu |
---|---|
|
Render Create Spotlight |
The Spotlight command inserts a light object into the model that directs a narrow beam of light with falloff.
The spotlight object appears as a cone shape. Its light appears only in full renderings of the targeted objects.
Use the Properties command to set the light's color and on or off state. Darker colors, like gray, light the scene less.
Steps
Command-line options
DirectionConstraint
Direction constraints restrict the direction of the circle.
None
The center can be anywhere in 3-D space.
The second point can be placed anywhere using elevator mode, object snaps or other modeling aids.
Vertical
Draws an object perpendicular to the construction plane.
Pick the center and a radius or diameter.
AroundCurve
Draws a circle perpendicular to a curve.
Select a curve and pick the center of the circle on the curve and a radius or diameter.
- Turn on the spotlight's control points and move or drag the control points to edit the spotlight's direction, length, beam angle, hotspot angle, and position.
- To move the light without changing its direction, move the dolly point (the control point at the midpoint between the cone tip and the center of the cone base).
- Spotlights with narrower cones produce more detail than spotlights with wider cones.
- The cone for the spotlight represents the direction of the light, not the range of the light.
- The brightness of the light from the spotlight remains constant, even as you move away from the tip of the cone.
- The length and width of the spotlight together do control the shape of the infinite cone in space that is illuminated by the spotlight.
- Objects near the center axis line of the cone are illuminated the most brightly. That bright full illumination continues for half of the width of the cone, and then slowly drops off to nothing at the very outside of the cone.
- Spotlight hardness controls the fully illuminated region. You can either shrink it or expand it so that there is no drop-off at all. The easiest way to see what this does it is to create a plane with a single spotlight shining on it, and then play with the spotlight hardness parameter to see what it does.
See also
Snapshots
The Snapshots command saves and restores Named Views, Named Positions, Layer States, as well as rendering settings, object settings including locked/hidden state, display mode, material, position, light settings, curve piping, displacement, edge softening, shutlining, and thickness.
Render
Render the objects using the current renderer.