Main toolbar
![](../image/command_icons/cancel.png)
Cancel
Cancel the current command and deselects objects.
![Toolbars: Collapse Mesh | Curve Drawing | Extract Mesh | Main | Main1 | Render Sidebar | Solids Sidebar | Surface Sidebar](../image/command_icons/cancel_all_rt.png)
Cancel,All
Turns off Points, CurvatureGraph, EMap, Zebra, MoveUVN, CurvatureAnalysis, and deselects objects.
![](../image/command_icons/point.png)
Point
Draw a single point object.
Link to Point toolbar
![Toolbar: 3-D Digitizing | Main | Point](../image/command_icons/points_rt.png)
Points
Draw multiple point objects.
![](../image/command_icons/polyline.png)
Polyline
Draw a multi-segment polyline with options for line and arc segments, tracking line helpers, and close.
Link to Lines toolbar
![](../image/command_icons/lines_rt.png)
Lines
Draw multiple adjoining line segments.
![](../image/command_icons/curve.png)
Curve
Draw a curve from control point locations.
Link to Curve toolbar
![](../image/command_icons/curvethroughpt_rt.png)
CurveThroughPt
Fit a curve through point objects.
![](../image/command_icons/circle.png)
Circle
Draw a circle from center and radius, diameter, points on the circumference, and circumference length.
Link to Circle toolbar
![](../image/command_icons/ellipse.png)
Ellipse
Draw a closed elliptical curve from focus points, center and edges, bounding rectangle, and around a curve.
Link to Ellipse toolbar
![](../image/command_icons/arc.png)
Arc
Draw an arc with options for center, start, angle, and direction.
Link to Arc toolbar
![](../image/command_icons/rectangle_corner.png)
Rectangle
Draw a rectangular closed polyline from with options for starting at the center, three points, vertical, and rounded with arc or conic corners.
Link to Rectangle toolbar
![](../image/command_icons/polygon.png)
Polygon
Draw a polygon with a specified number of sides with options for inscribed/circumscribed, by edge, star-shaped, around a curve, and vertical.
Link to Polygon toolbar
![](../image/command_icons/fillet.png)
Fillet
Add an arc between two curves and trims or extends the curves to the arc.
Link to Curve Tools toolbar
![](../image/command_icons/srfpt.png)
SrfPt
Draw a surface from three or four corner points.
Link to Surface Creation toolbar
![](../image/command_icons/filletsrf.png)
FilletSrf
Create a constant-radius round surface between two surfaces.
Link to Surface Tools toolbar
![](../image/command_icons/box.png)
Box
Draw a solid box.
Link to Solids Creation toolbar
![](../image/command_icons/booleanunion.png)
BooleanUnion
Combine the volumes of one or more objects.
Link to Solid Tools toolbar
![](../image/command_icons/project.png)
Project
Project curves/points toward a construction plane to intersect a surface, polysurface, mesh, or SubD.
Link to Curve From Object toolbar
![](../image/command_icons/mesh.png)
Mesh
Create a mesh from a NURBS surface or polysurface.
Link to Mesh Tools toolbar
![](../image/command_icons/meshtonurb_rt.png)
MeshToNURB
Duplicate each mesh face with a NURBS surface.
![](../image/command_icons/join.png)
Join
Connect curves, surface edges, or surfaces to form a single object.
![](../image/command_icons/join_rt.png)
JoinCopy
Duplicates the selected objects and joins the duplicates.
![](../image/command_icons/explode.png)
Explode
Break objects down into components.
![](../image/command_icons/extractsrf_explode_rt.png)
ExtractSrf
Separates or duplicates polysurface, Extrusion, or SubD faces.
![](../image/command_icons/trim.png)
Trim
Cut and delete selected portions of an object at the intersection with another object.
![](../image/command_icons/untrim_trim_rt.png)
Untrim
Remove trim curves from trimmed surfaces.
![](../image/command_icons/split.png)
Split
Divide objects using other objects as cutters.
![](../image/command_icons/split_isocurve_rt.png)
Split,Isocurve
Divide objects using isocurves as cutters.
![](../image/command_icons/group.png)
Group
Organize objects into a single component.
Link to Grouping toolbar
![](../image/command_icons/ungroup.png)
Ungroup
Remove the group status from objects.
![](../image/command_icons/ungroup_rt.png)
UngroupAll
Ungroups the selected group and the groups nested in it all at once.
![](../image/command_icons/editpton.png)
EditPtOn
Displays edit points on curves or SubDs.
![](../image/command_icons/pointson.png)
PointsOn
Display curve and surface control points.
Link to Point Editing toolbar
![](../image/command_icons/textobject.png)
TextObject
Draw text-shaped curves, surfaces, or polysurfaces based on TrueType fonts.
![](../image/command_icons/move.png)
Move
Move objects from one location to another.
Link to Transform toolbar
![](../image/command_icons/copy.png)
Copy
Duplicate objects.
![Toolbar: Main | Main1](../image/command_icons/copy_inplace_rt.png)
Copy, InPlace
Duplicate objects in the same location as the original.
![](../image/command_icons/rotate.png)
Rotate
Rotate objects around an axis perpendicular to the construction plane.
![](../image/command_icons/rotate3d_rt.png)
Rotate3D
Rotate objects around a 3-D axis.
![](../image/command_icons/scale.png)
Scale
Change the size of objects uniformly in the x, y, and z directions.
Link to Scale toolbar
![](../image/command_icons/scale2d_scale_rt.png)
Scale2D
Change the size of objects uniformly in two directions.
![](../image/command_icons/direction.png)
Dir
Display and edit an object's normal direction.
Link to Analyze toolbar
![](../image/command_icons/flip.png)
Flip
Reverse the normal direction of a curve, surface, or mesh.
![](../image/command_icons/array.png)
Array
Copy and space objects in columns, rows, and levels.
![](../image/command_icons/align.png)
Align
Lines up the bounding boxes of objects, or object grips (control points, edit points, vertices...).
Link to Align and Distribute toolbar
![](../image/command_icons/flowalongsrf.png)
FlowAlongSrf
Re-align objects from a source surface to a target surface.
Link to Deformation Tools toolbar
![](../image/command_icons/pushpull.png)
PushPull
Extrudes a polysurface face to interactively add or remove volumes on the polysurface.
Link to PushPull toolbar
![](../image/command_icons/check.png)
Check
Report errors in an object's data structure.
Link to Diagnostics toolbar
![](../image/command_icons/block.png)
Block
Define a block object.
![](../image/command_icons/history.png)
History
Store the connection between a command's input geometry and the result, so that when the input geometry changes, the result updates accordingly.
Link to History toolbar