Surface Sidebar toolbar

To open a toolbar...

Cancel

Cancel the current command and deselects objects.

Cancel,All

Turns off Points, CurvatureGraph, EMap, Zebra, MoveUVN, CurvatureAnalysis, and deselects objects.

CutPlane

Create planar surfaces through objects at specified locations.

Drape

Create a surface through the intersections of objects and points projected toward the construction plane.

EdgeSrf

Create a surface from two, three, or four curves.

Explode

Break objects down into components.

ExtractSrf

Separates or duplicates polysurface, Extrusion, or SubD faces.

ExtrudeCrv

Drive closed planar curves in a straight line.

Link to Extrude toolbar

ExtrudeCrvAlongCrv

Drive closed planar curves along a path curve.

ExtrudeCrvAlongCrv,SubCurve

Drives closed planar curves along a sub curve.

ExtrudeCrvTapered

Drive closed planar curves in a straight line tapering at an angle.

ExtrudeCrvToPoint

Drive closed planar curves tapering to a point.

Fin

Extrude a curve on a surface in the surface normal direction.

Heightfield

Create a surface based on gray-scale color values in an image file.

Join

Connect curves, surface edges, or surfaces to form a single object.

Loft

Fit a surface through profile curves that define the surface shape.

Move

Move objects from one location to another.

Link to Transform toolbar

NetworkSrf

Fit a surface through a network of crossing curves.

Patch

Fit a surface through curves and point objects.

Picture

Draw a rectangular planar surface with a bitmap texture.

PlanarSrf

Create a planar surface from planar curves.

Plane

Draw a rectangular planar surface.

Link to Plane toolbar

Plane,3Point

Draw a rectangular planar surface from three points.

PlaneThroughPt

Fit a rectangular planar surface through points.

Plane,Vertical

Draw a rectangular planar surface vertical to the construction plane.

Revolve

Create a surface or SubD by revolving a profile curve around an axis.

RailRevolve

Revolve a profile curve around an axis and along a rail curve.

Ribbon

Offset a curve and create a ruled surface between the curves.

Split

Divide objects using other objects as cutters.

Split,Isocurve

Divide objects using isocurves as cutters.

SrfPt

Draw a surface from three or four corner points.

SrfPtGrid

Draw a surface from a grid of points that lie on the surface.

Sweep1

Fit a surface through profile curves and one edge curve.

Sweep2

Fit a surface through profile curves and two edge curves.

Trim

Cut and delete selected portions of an object at the intersection with another object.

Untrim

Remove trim curves from trimmed surfaces.