Solid Tools toolbar

To open a toolbar...

BooleanUnion

Combine the volumes of one or more objects.

BooleanDifference

Subtract the volume of one set of objects from another.

BooleanIntersection

Create a new solid from solids' intersected volumes.

BooleanSplit

Split and close solids at intersections.

Boolean2Objects

Cycle through possible Boolean operations between two objects.

CreateSolid

Create a closed polysurface from surfaces.

Shell

Remove the selected surfaces from a polysurface, and then offset the remaining surfaces to create a solid with a specified thickness.

Cap

Fills planar holes in objects with planar faces.

ExtractSrf

Separates or duplicates polysurface, Extrusion, or SubD faces.

MergeCoplanarFace

Combines adjacent coplanar faces of a mesh, polysurface, or SubD into a single face.

MergeAllCoplanarFaces

Combines the faces of each planar region on a mesh, polysurface, or SubD into a single face.

UnjoinEdge

Split joined polysurface edges.

FilletEdge, edit

Edit a tangent surface between polysurface edges.

FilletEdge

Create a tangent surface between polysurface edges.

BlendEdge

Create a surface between polysurface edges maintaining continuity.

ChamferEdge

Create a ruled surface at polysurface edges.

WireCut

Trim a polysurface with a curve similar to cutting foam with a heated wire.

MoveFace

Move a polysurface face.

MoveUntrimmedFace

Move an untrimmed polysurface face.

MoveFace, ToBoundary

Move a polysurface face to a boundary.

ExtrudeSrf, face

Drive a surface face in a straight line to create a solid.

ExtrudeSrf, face AlongCurve

Drive surface edges along a path curve to create a solid.

ExtrudeSrf, face ToBoundary

Drive surface edges in a straight line to a boundary.

SolidPtOn

Turn on pseudo control points for polysurfaces.

MoveEdge

Move a polysurface edge.

MoveUntrimmedEdge

Move the edge of an untrimmed polysurface face.

SplitFace

Divide a planar polysurface face.

FoldFace

Rotate polysurface faces around an axis.

RoundHole

Create circular holes in surfaces.

MakeHole

Project a closed curve to a surface to define a hole.

PlaceHole

Project a closed curve to a surface to define a hole.

RevolvedHole

Create holes by revolving a profile curve around an axis.

MoveHole

Move a hole in a planar surface.

Copy hole

Copies a hole in a planar surface.

RotateHole

Rotate a hole around an axis.

ArrayHolePolar

Copy and space holes around a central location.

ArrayHole

Copy and space holes in rows and columns.

UntrimHoles

Untrims selected holes (interior trims) that do not touch surface borders.

Untrim all holes

Untrim all interior holes.

UnjoinEdge

Split joined polysurface edges.

DeleteFaces

Remove faces from a mesh, SubD or Polysurface to create a hole.