ExtrudeSrfAlongCrv
Toolbar | Menu |
---|---|
|
Solid Extrude Surface> Extrude Surface to Boundary> Along Curve |
The ExtrudeSrfAlongCrv command creates a solid by tracing the path of the surface edges along another path curve.
Steps
- Select a surface.
- Select the path curve near the start.
- A planar surface extrudes vertically to the surface plane by default. If the surface is not planar, the default extrusion direction is the z direction of the active CPlane.
-
The extrusion preview direction in the viewport defines the positive direction for distance input.
Command-line options | |
---|---|
Solid |
If the profile curve is closed and planar, both ends of the extruded object are filled with planar surfaces and joined to make a closed polysurface. |
DeleteInput |
YesDeletes the original geometry. NoRetains the original geometry. |
SubCurve |
Extrudes a curve the distance specified by picking two points along a curve. The extruded surface starts from the beginning of the curve, not the first picked point. Picking the points only establishes the extrusion distance. |
ToBoundary |
Extrudes the object to a boundary surface. |