ExtrudeSrf
Toolbar | Menu |
---|---|
Extrude Solid
|
Solid Extrude Surface> Extrude Surface to Boundary> Straight |
The ExtrudeSrf command creates a solid by tracing the path of the surface edges in a straight line.
Steps
- Select a surface.
- Specify a distance.
- A planar surface extrudes vertically to the surface plane by default. If the surface is not planar, the default extrusion direction is the z direction of the active CPlane.
-
The extrusion preview direction in the viewport defines the positive direction for distance input.
Command-line options | |
---|---|
SetBasePoint |
Specify a location that serves as the first point when picking two points that set the extrusion distance. |
Direction |
Two points establish the direction angle. Direction steps
|
BothSides |
Draws the object on both sides of the start point, creating the object twice as long as you indicate. |
Solid |
If the profile curve is closed and planar, both ends of the extruded object are filled with planar surfaces and joined to make a closed polysurface. |
DeleteInput |
YesDeletes the original geometry. NoRetains the original geometry. |
ToBoundary |
Extrudes the object to a boundary surface. |