To open a toolbar
To open a toolbar as a free-standing group
| 4 | Right-click a tool palette button with a linked tool palette. The linked tool palette opens. |
See: Themes.
To open a toolbar
To open a toolbar as a free-standing group
| 4 | Right-click a tool palette button with a linked tool palette. The linked tool palette opens. |
See: Themes.
Create an arc blend curve between two curves.
Connect two curves with continuity control.
Connect two curves maintaining continuity.
Create a line segment between two curves and trims or extends the curves to meet it.
在维持节点结构的情况下，通过增减曲线或曲面的控制点数量以变更曲线或曲面的阶数。
Close open curves.
Continue to draw the selected curve using control points.
Continue to draw the selected curve interpolating through picked points.
以设定的公差将曲线转换为由直线线段组成的多重直线。
以设定的公差将曲线转换为由圆弧线段组成的多重直线
Create a curve by averaging two input curves that are planar in two different views.
Change the seam (start/end) location on closed curves.
Create cross-section curves through profile curves.
Trim, split, and join curves based on their overlapping regions.
Remove a portion of a curve that is between two locations.
Lengthen a curve.
连结至延伸工具列
Separate or duplicate polycurve segments.
Remove large curvature variations in a curve while limiting the geometry changes to the specified tolerance.
Add an arc between two curves and trims or extends the curves to the arc.
Round polyline corners with arcs.
Make a non-rational NURBS curve of a specified degree that matches the input curve to within the specified tolerance.
Flatten the curve segment between picked points.
Make the object knot vectors uniform without changing the control point locations.
Change a curve end to meet another curve or surface edge with a specified continuity.
Change a curve's direction to match another curve's direction.
Copy a curve parallel to the original.
Copy a curve on a surface parallel to the original.
Copy a curve on a surface parallel to the original in the surface normal direction.
Display curve and surface control points.
连结至点的编辑工具列
Project curves/points toward a construction plane to intersect a surface.
连结至从物件建立曲线工具列
Project curves/points toward a construction plane to intersect a surface using the Loose option.
以设定的阶数与控制点数重建曲线、曲面或挤出物件。
重建选取的曲线使结构符合另一条曲线。
Interactively modify selected curves by non-uniformly re-spacing the control points.
Replace each curve segment that has the geometry of a line or an arc with a true line or arc.
Shorten a curve to the new picked endpoints.
将曲线或曲面镜像，并使两个曲面以设定的连续性相接。
Create curves between two open or closed input curves.
