To open a toolbar...
BlendSrf
Create a blend surface between two surfaces with continuity control.
ChamferSrf
Create a ruled surface between two surface edges.
ChangeDegree
Change the degree of the polynomial that defines the curve or surface by adding or subtracting control points between knot spans, while maintaining the knot structure.
ConnectSrf
Extend surface edges to meet and trims the surfaces to each other.
CurvatureAnalysis
Evaluate surface curvature using false-color analysis.
Link to Surface Analysis toolbar
CurvatureAnalysisOff
Turn off curvature analysis display.
CurvatureGraph
Evaluate curve or surface curvature with a graph.
CurvatureGraphOff
Turn off curvature graph display.
Dir
Display and edit an object's normal direction.
Flip
Reverse the normal direction of a curve, surface, or mesh.
DivideAlongCreases
Divide a surface into separate parts at kinks.
DivideAlongCreases, split at tangents
Divide a surface into separate parts at creases and tangents.
EndBulge
Adjust the shape of a curve at its end or a surface near an untrimmed edge.
ExtendSrf
Lengthen a surface by a value.
FilletSrf
Create a constant-radius round surface between two surfaces.
FitSrf
Reduce the number of surface control points.
Flip
Reverse the normal direction of a curve, surface, or mesh.
MakePeriodic
Remove the kink from the start/end of a curve or surface.
MakeNonPeriodic
Insert a kink at the start/end of a curve or surface.
MakeUniform
Make the object knot vectors uniform without changing the control point locations.
MakeUniformUV
Make the surface knots uniform in u or v direction.
MatchSrf
Adjust a surface edge to have continuity with another surface edge.
MatchSrf, Multiple Matches
Allows selection of more than one edge to match.
MergeSrf
Combine two surfaces at untrimmed edges.
OffsetSrf
Copy a surface parallel to the original.
Rebuild
Reconstruct curves, surfaces, and extrusion objects to a specified degree and control point number.
RebuildEdges
Restore surface edges to their surface.
RebuildUV
Reconstruct surfaces to a specified control point number in the u or v directions.
RemoveMultiKnot
Remove multiple knots from curves and surfaces.
SetSurfaceTangent
Set the tangent direction of an untrimmed surface.
ShowEdges
Highlight edges of surfaces and polysurfaces. Displays the Edge Analysis control.
Link to Edge Tools toolbar
ShowEdgesOff
Turn off edge display.
ShrinkTrimmedSrf
Contract the underlying untrimmed surface close to trimming boundaries.
ShrinkTrimmedSrfToEdge
Contract the underlying untrimmed surface as close as possible to the trimming boundaries.
Smash
Flatten a surface without restriction to single-directional curvature.
SrfSeam
Change the location where the start and end edges meet on a closed surface.
Symmetry
Mirror a copy of a curve or surface with continuity.
TweenSurfaces
Create intermediate surfaces between two input surfaces.
UnrollSrf
Flatten (develop) a surface or polysurface with curvature in one direction to a planar surface.
FlattenSrf
Project surface edges onto the construction plane to create planar curves.
Untrim
Remove trim curves from trimmed surfaces.
UnTrim, KeepTrimObjects
Remove trim curves and joined surfaces keeping the trimmed objects.
VariableChamferSrf
Create a chamfer surface between surface edges with varying distance values.
VariableFilletSrf
Create a round tangent surface between two surface edges with varying radius values.
VariableBlendSrf
Create a blend surface between surface edges with varying radius values.
VariableOffsetSrf
Copy a surface specified varying distances from the original surface.
Rhino for Mac © 2010-2017 Robert McNeel & Associates. 24-Oct-2017
