Cancel the current command and deselects objects.
Turns off Points, CurvatureGraph, EMap, Zebra, MoveUVN, CurvatureAnalysis, and deselects objects.
Create planar surfaces through objects at specified locations.
Create a surface through the intersections of objects and points projected toward the construction plane.
Create a surface from two, three, or four curves.
Drive closed planar curves along a path curve.
Drives closed planar curves along a sub curve.
Drive closed planar curves in a straight line tapering at an angle.
Drive closed planar curves tapering to a point.
Extrude a curve on a surface in the surface normal direction.
Create a surface based on gray-scale color values in an image file.
Connect curves, surface edges, or surfaces to form a single object.
Fit a surface through profile curves that define the surface shape.
Fit a surface through a network of crossing curves.
Fit a surface through curves and point objects.
Draw a rectangular planar surface with a bitmap texture.
Create a planar surface from planar curves.
Draw a rectangular planar surface from three points.
Fit a rectangular planar surface through points.
Draw a rectangular planar surface vertical to the construction plane.
Create a surface by revolving a profile curve around an axis.
Revolve a profile curve around an axis and along a rail curve.
Offset a curve and create a ruled surface between the curves.
Divide objects using other objects as cutters.
Divide objects using isocurves as cutters.
Draw a surface from three or four corner points.
Draw a surface from a grid of points that lie on the surface.
Fit a surface through profile curves and one edge curve.
Fit a surface through profile curves and two edge curves.
Cut and delete selected portions of an object at the intersection with another object.
Remove trim curves from trimmed surfaces.
Rhino for Mac © 2010-2017 Robert McNeel & Associates. 24-Oct-2017