Drape

Toolbar	Menu
Surface Creation Surface Sidebar	Surface Drape

Toolbar

Toolbar: Surface Creation | Surface Sidebar

Surface

Drape

The Drape command creates a surface through points defined at the intersection of objects and points projected toward the construction plane in the current viewport.

Steps

Drag a rectangle over the objects.
A surface is created that drapes over the objects.

Note

Drape works over meshes, surfaces, and solids.

Drape samples locations in the render depth buffer (z buffer) and then uses them for the surface control point locations. Because of this, the surface will always sag more than the original.

The Drape command uses the deepest point in the view for the base level of the drape surface. It only sees mesh or render mesh objects.

Command-line options
AutoSpacing	Yes All points within the draped surface are evenly-spaced at a distance set by the Spacing option. The lower the number, the more dense the surface will be. Spacing Sets the control point spacing. No Controls custom spacing for the points. U/V Sets the number of control points in the surface in the u and v directions.
AutoDetectMaxDepth	Yes Stops the draped surface at what is automatically determined to be the farthest visible point within the rectangle. No Controls the custom depth setting. MaxDepth Sets the maximum depth the draped surface. This can be farther away from (1.0) and/or closer to the camera (0.0), providing complete or partial coverage of an object.

Command-line options

AutoSpacing

Yes

All points within the draped surface are evenly-spaced at a distance set by the Spacing option. The lower the number, the more dense the surface will be.

Spacing

Sets the control point spacing.

No

Controls custom spacing for the points.

U/V

Sets the number of control points in the surface in the u and v directions.

AutoDetectMaxDepth

Yes

Stops the draped surface at what is automatically determined to be the farthest visible point within the rectangle.

No

Controls the custom depth setting.

MaxDepth

Sets the maximum depth the draped surface. This can be farther away from (1.0) and/or closer to the camera (0.0), providing complete or partial coverage of an object.

DrapePt

Toolbar	Menu
Point	Curve Point Object > Drape Points

Toolbar

Toolbar: Point

Point

Curve

Point Object >

Drape Points

The DrapePt command creates a grid of point objects at the intersections of objects and points projected toward the construction plane in the current viewport.

Steps

Drag a rectangle over the objects to drape.
A grid of points is created over the objects.

Command-line options
AutoSpacing	Yes All points within the draped surface are evenly-spaced at a distance set by the Spacing option. The lower the number, the more dense the surface will be. Spacing Sets the control point spacing. No Controls custom spacing for the points. U/V Sets the number of control points in the surface in the u and v directions.
AutoDetectMaxDepth	Yes Stops the draped surface at what is automatically determined to be the farthest visible point within the rectangle. No Controls the custom depth setting. MaxDepth Sets the maximum depth the draped surface. This can be farther away from (1.0) and/or closer to the camera (0.0), providing complete or partial coverage of an object.

Command-line options

AutoSpacing

Yes

All points within the draped surface are evenly-spaced at a distance set by the Spacing option. The lower the number, the more dense the surface will be.

Spacing

Sets the control point spacing.

No

Controls custom spacing for the points.

U/V

Sets the number of control points in the surface in the u and v directions.

AutoDetectMaxDepth

Yes

Stops the draped surface at what is automatically determined to be the farthest visible point within the rectangle.

No

Controls the custom depth setting.

MaxDepth

Sets the maximum depth the draped surface. This can be farther away from (1.0) and/or closer to the camera (0.0), providing complete or partial coverage of an object.

Drape

Steps

Note

Yes

Spacing

No

U/V

Yes

No

MaxDepth

DrapePt

Steps

Yes

Spacing

No

U/V

Yes

No

MaxDepth

See also

Point