Zoom
Toolbar | Menu | Alias |
---|---|---|
|
View Zoom |
Z=Zoom ZE=Zoom Extents ZEA=Zoom All Extents ZS=Zoom Selected ZSA=Zoom All Selected |
The Zoom command moves the viewport camera point toward and away from the target point.
Command-line options | |
---|---|
Draws a window to define the view
|
|
Zooms all viewports. ExtentsZooms all viewports to show all objects. ShortcutCtrl (CMD) + Alt + E SelectedZooms all viewports to show all selected objects. 1to1Zooms all viewports so that the views are full scale. |
|
Zooms the view as you drag the mouse.
|
|
Zooms the view to show all objects. ShortcutCtrl (CMD) + Shift + E |
|
Zooms the view in or out the specified amount. Values greater than 1 zoom in; values between 0 and 1 zoom out. |
|
In |
Zooms the view in. |
Out |
Zooms the view out. |
Zooms the view to show all selected objects. |
|
Zooms the view by specifying a target and window. |
|
Zooms the active viewport so that the view is full scale. The command must be calibrated for this command to work properly. In perspective views, only objects on the target plane will be displayed full scale; in parallel views objects on any plane perpendicular to the camera axis are displayed full scale. The model must have units set. |
Mouse or Keys |
Shortcut | Zoom Action |
---|---|---|
|
Mouse wheel |
Zoom In and Out (Focus on initial cursor location)
|
|
Ctrl (CMD) + Right mouse button |
|
|
Ctrl (CMD) + Mouse wheel |
Zoom In and Out (Focus on view center) |
|
Page Down, Page Down |
|
|
Ctrl (CMD) + Shift + Alt + Right mouse button |
|
|
Z |
|
|
Ctrl + W |
|
|
Ctrl (CMD) + Shift + E | |
|
Ctrl (CMD) + Alt + E |
Related commands
Toolbar | Menu |
---|---|
|
View Set Camera > Adjust Lens Length and Dolly |
The DollyZoom command moves the camera location and changes the lens length at the same time, keeping the objects at the target plane about the same size.
DollyZoom is effective in Perspective viewports only.
Steps
-
Click the left mouse button in the viewport and drag.
Start dragging the mouse near a viewport edge. The Lens length of the view camera snaps in 5 mm increments.
Toolbar | Menu |
---|---|
|
View Zoom One to One Calibration |
The Zoom1To1Calibrate command calibrates the screen for the Zoom command, 1To1 option.
Steps
- Measure the bar on the screen with a ruler.
- Type the length and unit system in the calibration box.
Toolbar | Menu | Shortcut |
---|---|---|
|
View Set Camera > Adjust Lens Length |
Ctrl + Shift + Alt + |
The ZoomLens command adjusts the lens length of the viewport camera in a perspective view.
Steps
-
Click the left mouse button in the viewport and drag.
Start dragging the mouse near a viewport edge. The Lens length of the view camera snaps in 5 mm increments.
Command-line options | |
---|---|
In |
Makes the lens length longer. |
Out |
Makes the lens length shorter. |
Toolbar | Menu |
---|---|
|
|
The ZoomNaked command finds and marks naked edges.
Steps
- Select objects.
The active view zooms to display the first naked edge.
Command-line options | |
---|---|
All |
Zooms to all naked edges. |
Current |
Zooms to the current naked edge. This useful if you zoom out with the mouse and want to zoom back in. |
Next |
Zooms to the next naked edge. If the selected objects have only one naked edge, this option is not displayed. |
Previous |
Zooms to the previous naked edge. If the selected objects have only one naked edge, this option is not displayed. |
Mark |
Marks the current naked edge by adding point objects at each end. If the All option was previously selected, all naked edges are marked. |
Toolbar | Menu |
---|---|
|
|
The ZoomNonManifold command finds and marks non-manifold edges on selected objects.
Command-line options | |
---|---|
All |
Zooms to all naked edges. |
Current |
Zooms to the current naked edge. This useful if you zoom out with the mouse and want to zoom back in. |
Next |
Zooms to the next naked edge. If the selected objects have only one naked edge, this option is not displayed. |
Previous |
Zooms to the previous naked edge. If the selected objects have only one naked edge, this option is not displayed. |
Mark |
Marks the current naked edge by adding point objects at each end. If the All option was previously selected, all naked edges are marked. |
Toolbar | Menu |
---|---|
|
|
The SetZoomExtentsBorder command sets the amount of blank space between objects and the viewport edges when the Zoom command, Extents option is used.
After the object extents bounding box is calculated, this box is scaled based on the scale factors set by this command, increasing the space between objects and the viewport borders.
Specify a scale for the view border.
Command-line options | |
---|---|
Scale factor |
Greater than 1Increases the space between objects and the viewport borders. Less than 1Decreases the space between objects and the viewport borders. |
ParallelView |
Sets the border size for parallel views. |
PerspectiveView |
Sets the border size for perspective views. |