多重曲面

A polysurface consists of two or more surfaces that are joined together. A polysurface that encloses a volume of space defines a solid.

Solids are created anytime a surface or polysurface is completely closed.

Some Rhino commands create polysurface solids. Pyramid, Cone, and TruncatedCone are examples of commands that create polysurface solids.

輕量化的擠出物件

The Box, Cylinder, Tube, ExtrudeCrv, and ExtrudeSrf commands can create polysurface or extrusion objects. Polysurfaces can be closed with a planar cap or open.

附註

In models containing large numbers of polysurfaces, performance can be sluggish due to the relatively high demand on resources. If the same objects are made in Rhino as lightweight extrusion objects, these models are more responsive and more memory is available.
The UseExtrusions command controls the use of lightweight extrusion objects. To make commands that normally create extrusions create traditional polysurfaces, select the Polysurface option.

相關的指令

UseExtrusions

Specifies whether extrusion objects or polysurfaces are used when extruding straight‑side objects.

The UseExtrusions command controls the use of extrusion objects.

When UseExtrusions is turned on, Rhino commands that create simple solids and surfaces will use extrusion objects when possible.
When UseExtrusions is turned off, these commands will create surface and polysurface objects.
Turning off UseExtrusions does not change existing extrusion objects.

ConvertExtrusion

將擠出物件轉換為曲面或多重曲面。

SelPolysrf

選取所有的多重曲面。

SelClosedPolysrf

選取所有封閉的多重曲面。

SelOpenPolysrf

選取所有開放的多重曲面。

Explode

將組合在一起的物件打散成為個別的物件。

Exploding a polysurface results in surfaces.

ConvertExtrusion

將擠出物件轉換為曲面或多重曲面。

Draw polysurfaces

When UseExtrusions is turned off, these commands will create surface and polysurface objects.

When UseExtrusions is turned off, these commands will create surface and polysurface objects.

Boss

將封閉的平面曲線往與曲線平面垂直的方向擠出至邊界曲面,並與邊界曲面組合成多重曲面。

Box

建立一個立方體。

Cone

建立一個圓錐體。

Cylinder

建立一個圓柱體。

Fin

將曲面上的曲線往曲面的法線方向擠出。

Pipe

Create a surface, polysurface, or extrusion object with a circular profile around a curve.

Pyramid

建立一個金字塔。

Rib

將曲線擠出成曲面,再往邊界物件擠出,並與邊界物件結合。

Ribbon

將曲線偏移,並在兩條曲線之間建立規則曲面。

Slab

將多重直線偏移,然後擠出並加蓋建立實體。

TCone

建立頂點被平面截斷的圓錐體。

TruncatedPyramid

建立頂點被平面截斷的金字塔。

Extrude curves into polysurfaces

When UseExtrusions is turned off, these commands will create surface and polysurface objects.

ExtrudeCrv

往一個方向擠出曲線。

ExtrudeCrvAlongCrv

將曲線沿著一條路徑擠出。

ExtrudeCrvTapered

將曲線以設定的拔模角度擠出。

ExtrudeCrvToPoint

將曲線擠出至一點。

Extrude surfaces into polysurfaces

When UseExtrusions is turned off, these commands will create surface and polysurface objects.

ExtrudeSrf

往一個方向擠出曲面。

ExtrudeSrfAlongCrv

沿著曲線擠出曲面。

ExtrudeSrfTapered

以設定的拔模角度擠出曲面。

ExtrudeSrfToPoint

將曲面擠出至一點。

請參考

擠出曲線與曲面