Copy and space holes in rows and columns.
Copy and space holes around a central location.
Subtract the volume of one set of objects from another.
Create a new solid from solids' intersected volumes.
Split and close solids at intersections.
Cycle through possible Boolean operations between two objects.
Combine the volumes of one or more objects.
Fill planar openings with a surface joined to the hole edge.
Create a ruled surface at polysurface edges.
Create a closed polysurface from surfaces.
Separate or duplicate a polysurface face.
Drive a surface face in a straight line to create a solid.
Drive surface edges along a path curve to create a solid.
Drive surface edges in a straight line to a boundary.
Create a tangent surface between polysurface edges.
Create a surface between polysurface edges maintaining continuity.
Edit a tangent surface between polysurface edges.
Rotate polysurface faces around an axis.
Project a closed curve to a surface to define a hole.
Project a closed curve to a surface to define a hole.
Combine co-planar polysurface faces.
Link to Solid Editing toolbar
Combine all co-planar polysurface faces.
Move a polysurface face to a boundary.
Create holes by revolving a profile curve around an axis.
Rotate a hole around an axis.
Create circular holes in surfaces.
Remove the selected surfaces from a polysurface, and then offset the remaining surfaces to create a solid with a specified thickness.
Turn on pseudo control points for polysurfaces.
Divide a planar polysurface face.
Split joined polysurface edges.
Untrim selected interior holes.
Untrim all interior holes.
Trim a polysurface with a curve similar to cutting foam with a heated wire.
Rhino for Mac © 2010-2017 Robert McNeel & Associates. 24-Oct-2017