Toolbar | Menu |
---|---|
|
Solid Solid Edit Tools > Wire Cut |
The WireCut command trims a polysurface with a curve similar to cutting foam with a heated wire.
Command-line options | |
---|---|
Line |
Lets you draw a cutting line instead of selecting an existing curve. |
Direction |
X/Y/ZConstrains the direction for the wire curve extrusion to world x, y, or z. NormalToCurveConstrains the direction for the wire curve extrusion to the curve plane normal. CPlaneNormalConstrains the direction for the wire curve extrusion to the construction plane z direction. PickTwo points establish the direction angle. Pick steps
AlongCurve (closed curves only)Constrains the direction for the hole extrusion along a curve. |
DeleteInput |
YesDeletes the original geometry. NoRetains the original geometry. |
BothSides |
Draws the object on both sides of the start point, creating the object twice as long as you indicate. |
Direction |
X/Y/ZConstrains the direction for the second cut extrusion to world x, y, or z. NormalToFirstExtrusionConstrains the direction for the second cut extrusion to the first cut extrusion normal. PickPick two points to specify the second cut extrusion direction. |
Invert |
Changes the selected and highlighted part that will be cut away and deleted from the currently highlighted part to the other part. |
KeepAll |
Keeps all parts of the solid. |
Split and trim curves and surfaces
Rhino for Mac © 2010-2017 Robert McNeel & Associates. 24-Oct-2017