Stereolithography (.stl) import/export
STL files describe only the surface geometry of a three dimensional object without any representation of color, texture or other common CAD model attributes.
STL files contain polygon mesh objects. Polygon mesh objects import into Rhino as polygon mesh objects. They are not converted to NURBS.
To open, import, insert, and attach a file as a worksession
From the File menu, click Open, Insert, Import, or Worksession > Attach.
- In the dialog box, select a supported file type.
and configure the settings.
When you open a non-3dm file and save the model, its filename will be the default 3dm filename.
STL Import Options
Weld angle ___ degrees
The angle at which the automatic weld will be performed.
Split disjoint meshes
Determines whether disjoint pieces of a mesh will be automatically split up on import.
STL model units
If the STL file has units saved, they will be displayed.
Current Rhino units
Displays the units in the current file. This applies only to the Import and Insert commands. The Open command displays Rhino units as None.
If the Rhino file and the file being imported have different units, the imported model geometry will be scaled accordingly.
Always use these settings. Do not show this dialog again.
Saves the current settings and turns off the dialog display.
To save as or export a Rhino model
- On the File menu, click Export Selected or Save As.
- In the dialog box, the Files of type list displays the currently supported file types for export.
- In the Files of type box, select the supported file type.
- In the File name box, select or type a file name.
- Specify what is to be saved.
Though clearing the render meshes makes the file smaller, it will shade and render more slowly the next time you open the file.
Save geometry only
Saves geometry objects only. No layers, materials, properties, notes, or units settings are saved. This is similar to exporting the objects. A new file is made, but it does not become your active Rhino model.
Embeds external textures used by materials, environments and decals into the model.
Save plugin data
||Saves data attached to objects or the document by plug-in applications.
- If the export can be configured, click the
button to specify export settings.
- If the file type creates only mesh objects, in the Polygon Mesh Objects dialog box, specify the mesh settings.
STL Mesh Export Options
The maximum distance between the original object and the polygon mesh created for the STL file.
Displays a preview of the output.
If you change the settings, click the
button again to refresh the display.
STL Export Options
Export open objects
STL Export Warning
If the STL mesh is not closed, a warning dialog appears.
Saves the open mesh.
STL mesh export diagnostics
For some rapid prototyping machines, STL files must contain completely closed (watertight) polygon mesh objects.
You might want to do this to ensure that the meshes really do fit together before exporting them for use in an expensive STL job.
To test for watertightness
- Join the mesh objects.
Conceptually, this command gets all the triangles into one bag, but it doesn't glue the edges together. (The situation is similar to having surfaces that all fit together but have not been joined into a solid.)
- Weld the new mesh object.
At the Angle tolerance prompt type 180.
An angle tolerance of 180 tells the Weld command to glue adjacent triangle points together no matter what.
This changes all the triangles so they are oriented the same way, that is, if two triangles share an edge, then they have the same idea of up.
To see if the result has any holes or gaps, type SelNakedMeshEdgePt.
If a mesh point is highlighted, then it is part of a "naked" triangle edge.
To avoid generating very large mesh files
- Start with the Mesh command, which has the same controls as the render mesh controls found in Mesh Document Properties. The difference is that the Mesh command, however, produces a polygon mesh you can export. You would get the same controls by exporting the Rhino geometry to STL, but in general it is preferable to make the mesh object as a separate operation and export that.
- The settings that work best for STL will vary, but a good place to start is to go to clear the Maximum Angle setting and the Maximum Aspect Ratio setting completely. Set the Maximum distance edge to surface setting (which is the desired maximum distance between the midpoint of any edge of a polygon and the true surface) to something around the resolution of the rapid prototyping machine. About .005 inch (.125mm) might be a good number to start with. It may be that once you have determined which are the best settings for your projects and rapid prototyping machine, this procedure may become superfluous. Instead you may just want to export the NURBS objects directly and use your proven mesh settings when the object is converted to polygons during export.
- Once the mesh is generated, you can hide the NURBS object and inspect the mesh using the FlatShade command. This will show you a shaded view of the polygons without the smoothing tricks used by normal shaded views. If the mesh looks good, export the mesh to the STL file. If not, delete the mesh and try different mesh settings.
- It is best to only change one setting at a time to see the effects of that setting. If the mesh is fine enough but some areas do not work, try Maximum aspect ratio to something between 4 and 7. It is generally not worth setting Maximum distance edge to surface to much below the resolution of the rapid prototyping machine.
Wikipedia: STL (file format)
Rhinoceros 7 © 2010-2022 Robert McNeel & Associates. 28-Jul-2022