To open a toolbar...
Arc
Draw an arc with options for center, start, angle, and direction.
Link to Arc toolbar
Arc, Start, End, Direction
Arc by start, end, direction at start.
Arc, Start, Direction, End
Arc by start, direction at start, end.
Arc, Start, End, Point
Arc by start, end, point on arc.
Arc, Start, Point, End
Arc by start, point on arc, end.
Cancel
Cancel the current command and deselects objects.
Cancel, All
Turns off Points, CurvatureGraph, EMap, Zebra, MoveUVN, CurvatureAnalysis, and deselects objects.
Catenary
Creates a curve that a hanging chain or cable assumes under its own weight when supported only at its ends.
Circle
Draw a circle from center and radius, diameter, points on the circumference, and circumference length.
Link to Circle toolbar
Circle, Diameter
Draws a circle from points on diameter.
Circle, Tangent, Tangent, Radius
Draws a circle tangent to two curves and a radius.
Circle, Vertical to CPlane: center, radius
Draws a circle from a center and radius vertical to construction plane.
Conic, Tangent at start
Draw a conic curve tangent at the start.
Conic, Tangent at start and end
Draw a conic curve tangent at the start and end.
Curve
Draw a curve from control point locations.
Link to Curve toolbar
CurveThroughPt
Fit a curve through point objects.
Ellipse
Draw a closed elliptical curve from focus points, center and edges, bounding rectangle, and around a curve.
Link to Ellipse toolbar
Ellipse, Diameter
Draws a closed elliptical curve by diameter.
HandleCurve
Draw chained Bézier curves with editing handles.
Helix
Draw a helical curve with options for number of turns, pitch, vertical, reverse, and around a curve.
Helix, Vertical
Draw a vertical helical curve.
InterpCrv
Fit a curve through picked locations.
HandleCurve
Draw chained Bézier curves with editing handles.
InterpCrvOnSrf
Fit a curve through locations on a surface.
Join
Connect curves, surface edges, or surfaces to form a single object.
Line
Draw a single line segment.
Line, Normal
Draw a line segment normal to a surface.
Line, Normal, BothSides
Draw a line segment normal to a surface from its midpoint.
Line, Perpendicular, from curve
Draw a line segment perpendicular from a curve.
Line, Perpendicular, to curve
Draw a line segment perpendicular to a curve.
Line, Tangent
Draw a line segment tangent from a curve.
Line, Vertical
Draw a line segment perpendicular to the construction plane.
Line, Vertical, BothSides
Draw a line segment perpendicular to the construction plane from its midpoint.
Parabola
Draw a parabolic curve from focus and vertex or endpoint.
Parabola3Pt
Draw a parabolic curve through three picked points.
Polygon
Draw a polygon with a specified number of sides with options for inscribed/circumscribed, by edge, star-shaped, around a curve, and vertical.
Link to Polygon toolbar
Polygon, Square from center and corner
Draw a square polygon by center and corner.
Polygon, Square, from edge
Draw a square polygon by edge.
Polygon, Star
Draw a polygon star.
Polyline
Draw a multi-segment polyline with options for line and arc segments, tracking line helpers, and close.
Link to Lines toolbar
Lines
Draw multiple adjoining line segments.
Rectangle
Draw a rectangular closed polyline from with options for starting at the center, three points, vertical, and rounded with arc or conic corners.
Link to Rectangle toolbar
Rectangle, 3Point
Draw a rectangle through three points.
Rectangle, Rounded
Draw a rectangle with rounded corners.
Rectangle, Rounded, conic corners
Draw a rectangle with conic rounded corners.
Rectangle, Vertical
Draw a rectangle perpendicular to the construction plane.
Sketch
Drag the mouse to draw a curve.
Sketch, on surface
Drag the mouse to draw a curve on a selected surface.
Split
Divide objects using other objects as cutters.
Split, Isocurve
Divide objects using isocurves as cutters.
Trim
Cut and delete selected portions of an object at the intersection with another object.
Untrim
Remove trim curves from trimmed surfaces.
Rhino 6 for Mac © 2010-2020 Robert McNeel & Associates. 11-Nov-2020
