Create planar surfaces through objects at specified locations.

Creates a single developable surface between two rails.

Create a surface through the intersections of objects and points projected toward the construction plane.

Create a surface from two, three, or four curves.

Drive closed planar curves along a path curve.

Drive closed planar curves in a straight line tapering at an angle.

Drive closed planar curves tapering to a point.

Extrude a curve on a surface in the surface normal direction.

Create a surface based on gray-scale color values in an image file.

Fit a surface through profile curves that define the surface shape.

Fit a surface through a network of crossing curves.

Fit a surface through curves and point objects.

Draw a rectangular planar surface with a bitmap texture.

Create a planar surface from planar curves.

Draw a rectangular planar surface from three points.

Fit a rectangular planar surface through points.

Draw a rectangular planar surface vertical to the construction plane.

Create a surface by revolving a profile curve around an axis.

Revolve a profile curve around an axis and along a rail curve.

Offset a curve and create a ruled surface between the curves.

Draw a surface from three or four corner points.

Draw a surface from a grid of points that lie on the surface.

Fit a surface through profile curves and one edge curve.

Fit a surface through profile curves and two edge curves.

Rhinoceros 6 © 2010-2020 Robert McNeel & Associates. 13-Oct-2020