在曲线或曲面之间建立圆角、混接、斜角

Use these methods to create transitions between curves and surfaces.

Fillet curves and surfaces

Fillets are arc-shaped transitions between curves on the same plane or between surfaces.

Filleted surfaces.

Fillet

Add an arc between two curves and trims or extends the curves to the arc.

FilletCorners

Round polyline corners with arcs.

FilletEdge

Create a tangent surface between polysurface edges.

FilletSrf

Create a constant-radius round surface between two surfaces.

VariableFilletSrf

Create a round tangent surface between two surface edges with varying radius values.

Chamfer curves and surfaces

Chamfers are straight-line transitions between curves on the same plane or between surfaces.

Chamfered surfaces.

Chamfer

Create a line segment between two curves and trims or extends the curves to meet it.

ChamferEdge

Create a ruled surface at polysurface edges.

ChamferSrf

Create a ruled surface between two surface edges.

VariableChamferSrf

Create a chamfer surface between surface edges with varying distance values.

Blend curves and surfaces

Blends are smooth transitions with continuity matching between curves on the same plane or between surfaces.

Blended surfaces.

混接曲线

Connect two curves maintaining continuity.

BlendCrv

Connect two curves with continuity control.

BlendEdge

Create a surface between polysurface edges maintaining continuity.

BlendSrf

Create a blend surface between two surfaces with continuity control.

VariableBlendSrf

在两个曲面之间建立不等距的混接曲面。

请参考

编辑曲线

编辑实体物件

编辑曲面