UnifyMeshNormals

The UnifyMeshNormals command changes the normal direction of the faces in a mesh object so they all point in a consistent direction.

This helps repair meshes for rapid prototype printing.

Note

• Some STL/SLA printers have problems if meshes contain many long, thin facets. These facets can slow the printer down, produce odd results, or run the printer out of memory.
• The MeshRepair command may be useful when tuning up meshes for STL/SLA printing.

Note

• If UnifyMeshNormals doesn't seem to affect your mesh, explode it. Once the normals are correct, re-join the meshes.
• A polygon can have two types of normals: vertex normals and a face normal.
• All polygons have a face normal direction, but many polygon meshes do not have vertex normals. For example, 3DFace objects, mesh primitives, and polygon meshes imported in formats other than 3DM and 3DS do not have vertex normals.
• In general, the order of the vertices in a polygon determines the face normal direction. The order of the vertices should be either clockwise or counterclockwise. You can determine the normal direction from the vertices using the right-hand rule.
• You use the UnifyMeshNormals command primarily to make sure that the vertex order of all polygons in welded mesh is the same.

Example

1. Import an STL file with holes in it.
2. Fill the holes in the mesh.
3. Weld the mesh setting the welding angle to 180 to make sure all vertices get welded.
4. Use UnifyMeshNormals.
5. Turn on one sided rendering and shade the model to see if the mesh face normals point in or out.
   If you see inside the mesh, normals point the wrong way.
6. Use the Flip command to change the mesh normal direction if necessary.
7. Export in desired format.

See also

Edit mesh objects

White paper: Scan, Cleanup, Remodel