Surface Sidebar toolbar
To open a toolbar...
Cancel
Cancel the current command and deselects objects.
Cancel,All
Turns off Points, CurvatureGraph, EMap, Zebra, MoveUVN, CurvatureAnalysis, and deselects objects.
CutPlane
Create planar surfaces through objects at specified locations.
Drape
Create a surface through the intersections of objects and points projected toward the construction plane.
EdgeSrf
Create a surface from two, three, or four curves.
Explode
Break objects down into components.
ExtractSrf
Separates or duplicates polysurface, Extrusion, or SubD faces.
ExtrudeCrv
Drive closed planar curves in a straight line.
Link to Extrude toolbar
ExtrudeCrvAlongCrv
Drive closed planar curves along a path curve.
ExtrudeCrvAlongCrv,SubCurve
Drives closed planar curves along a sub curve.
ExtrudeCrvTapered
Drive closed planar curves in a straight line tapering at an angle.
ExtrudeCrvToPoint
Drive closed planar curves tapering to a point.
Fin
Extrude a curve on a surface in the surface normal direction.
Heightfield
Create a surface based on gray-scale color values in an image file.
Join
Connect curves, surface edges, or surfaces to form a single object.
Loft
Fit a surface through profile curves that define the surface shape.
NetworkSrf
Fit a surface through a network of crossing curves.
Patch
Fit a surface through curves and point objects.
Picture
Draw a rectangular planar surface with a bitmap texture.
PlanarSrf
Create a planar surface from planar curves.
Plane
Draw a rectangular planar surface.
Link to Plane toolbar
Plane,3Point
Draw a rectangular planar surface from three points.
PlaneThroughPt
Fit a rectangular planar surface through points.
Plane,Vertical
Draw a rectangular planar surface vertical to the construction plane.
Revolve
Create a surface or SubD by revolving a profile curve around an axis.
RailRevolve
Revolve a profile curve around an axis and along a rail curve.
Ribbon
Offset a curve and create a ruled surface between the curves.
Split
Divide objects using other objects as cutters.
Split,Isocurve
Divide objects using isocurves as cutters.
SrfPt
Draw a surface from three or four corner points.
SrfPtGrid
Draw a surface from a grid of points that lie on the surface.
Sweep1
Fit a surface through profile curves and one edge curve.
Sweep2
Fit a surface through profile curves and two edge curves.
