ExtrudeSrfToPoint

Toolbar Menu

Extrude Solid

Solid

Extrude Surface>

Extrude Surface to Boundary>

To Point

 History enabled

The ExtrudeSrfToPoint command creates a solid by tracing the path of the surface edges tapering to converge at a selected point.

Steps

  1. Select a surface.
  2. Pick the point to extrude to.
  • A planar surface extrudes vertically to the surface plane by default. If the surface is not planar, the default extrusion direction is the z direction of the active CPlane.
  • The extrusion preview direction in the viewport defines the positive direction for distance input.

Command-line options

Solid

If the profile curve is closed and planar, both ends of the extruded object are filled with planar surfaces and joined to make a closed polysurface.

DeleteInput

Yes

Deletes the original geometry.

No

Retains the original geometry.

ToBoundary

Extrudes the object to a boundary surface.

See also

Extrude curves and surfaces