Contour
Toolbar | Menu |
---|---|
|
Curve Curve From Objects > Contour |
The Contour command creates a spaced series of planar curves and points resulting from the intersection of a defined cutting planes through objects.
Input |
---|
|
Steps
- Select objects for contour creation.
- Pick the base point.
One of the contour planes will go through this point. The contour curves and points are created from the intersections of a series of invisible parallel planes cutting through the selected object. - Pick a direction perpendicular to the contour planes.
The contour planes will be generated in both directions from the base point and will be perpendicular to the picked direction. - Specify the distance between contours and press Enter.
This will create contour curves where the contour planes intersect the selected surfaces and polysurfaces and points where the contour planes intersect the selected curves.
Infinite Plane: Type IP for InfinitePlane options.
Command-line options | |
---|---|
AssignLayersBy |
CurrentLayerCreates the output curves and points on the current layer. InputObjectCreates the output curves and points on the same layer as the input objects. |
GroupObjectsByContourPlane |
Specifies whether or not contour on the same contour plane will be grouped. |
JoinCurves |
ByPolysurfaceCurves in the same contour plane created from a polysurface will be joined. ByContourPlaneAll curves in the same contour plane will be joined. NoneNo curve joining. |
Range |
Specifies limits for the contours. Steps
|
Type subcrv to select part of a curve as input. |
Toolbar | Menu |
---|---|
|
Curve Curve From Objects > Section |
The Section command creates a planar curve or points resulting from the intersection of a defined cutting plane through objects.
Input |
---|
|
Steps
- Select objects.
- Pick the start of the section plane.
- Pick the end of the section.
Section curves and points are created by intersecting the selected objects with the section plane, which is perpendicular to the construction plane. - Press Enter when you finish creating sections.
Infinite Plane: Type IP for InfinitePlane options.
Command-line options | |
---|---|
AssignLayersBy |
CurrentLayerCreates the output curves and points on the current layer. InputObjectCreates the output curves and points on the same layer as the input objects. |
GroupObjectsBySectionPlane |
Specifies whether or not the section curves on the same section plane will be grouped. |
JoinCurves |
ByPolysurfaceCurves in the same section plane created from a polysurface will be joined. BySectionPlaneAll curves in the same section plane will be joined. NoneNo curve joining. |
ExtendSection |
Specifies whether or not the section curves will automatically be created for all selected objects as though the drawn section plane extended through them. |