Toolbars can be opened as a free-standing group or added to the current group.
To open a toolbar as a free-standing group
|1.|| Click the Options icon in any toolbar group.
|2.||On the menu, click Show Toolbar, and then select the toolbar name from the list.|
To open a toolbar as a new tab in the current group
|1.|| Click the Options icon in the toolbar group where you want to add the new tab.
|2.||On the menu, click Show or Hide Tabs, and then select the toolbar name from the list.|
Cancel the current command and deselects objects.
Create planar surfaces through objects at specified locations.
Create a surface through the intersections of objects and points projected toward the construction plane.
Create a surface from two, three, or four curves.
Drive closed planar curves along a path curve.
Drives closed planar curves along a sub curve.
Drive closed planar curves in a straight line tapering at an angle.
Drive closed planar curves tapering to a point.
Extrude a curve on a surface in the surface normal direction.
Create a surface based on gray-scale color values in an image file.
Connect curves, surface edges, or surfaces to form a single object.
Fit a surface through profile curves that define the surface shape.
Fit a surface through a network of crossing curves.
Fit a surface through curves and point objects.
Draw a rectangular planar surface with a bitmap texture.
Create a planar surface from planar curves.
Draw a rectangular planar surface from three points.
Fit a rectangular planar surface through points.
Draw a rectangular planar surface vertical to the construction plane.
Create a surface by revolving a profile curve around an axis.
Revolve a profile curve around an axis and along a rail curve.
Offset a curve and create a ruled surface between the curves.
Divide objects using other objects as cutters.
Divide objects using isocurves as cutters.
Draw a surface from three or four corner points.
Draw a surface from a grid of points that lie on the surface.
Fit a surface through profile curves and one edge curve.
Fit a surface through profile curves and two edge curves.
Cut and delete selected portions of an object at the intersection with another object.
Remove trim curves from trimmed surfaces.
Rhinoceros 5 © 2010-2015 Robert McNeel & Associates. 17-Sep-2015
Open topic with navigation