Where can I find this command?
The ScaleNU command changes the size of selected objects in three directions using different lengths for each direction.
Steps
| 1. | Select objects. |
| 2. | Pick an origin. |
| 3. | Type the x scale factor, or pick two reference points. (Press Enter for a scale of 1.0.) |
| 4. | Type the y scale factor, or pick two reference points. (Press Enter for a scale of 1.0.) |
| 5. | Type the z scale factor, or pick two reference points. (Press Enter for a scale of 1.0.) The objects expand or contract in the three directions with the scale factor values specified. |
Command-line options
Copy
The Copy option specifies whether or not the objects are copied. A plus sign 
appears at the cursor when copy mode is on.
Note: The RememberCopyOptions command determines whether the selected option is used as the default.
WorldCoordinates
Use world coordinates for the scaling direction.
See also
Displays the gumball widget on a selected object facilitating move, scale, and rotate transformations around the gumball origin.
Store the connection between a command's input geometry and the result, so that when the input geometry changes, the result updates accordingly.
Specify whether Copy option on transform commands is stored.
Change the size of objects uniformly in the x-, y-, and z-directions.
Change the size of objects in one direction.
Change the size of objects uniformly in two directions.
Change the size of objects in two directions non-uniformly.
Rhinoceros 5 © 2010-2015 Robert McNeel & Associates. 17-Sep-2015
