VDA 是德国汽车工业协会制定的中性文件格式,用以在不同的系统之间交换 CAD 数据。
VDAFS 文件可以支持 3D 几何图形及拓扑信息,但不支持绘图信息、符号、视图,也不支持组合件及特征信息。
To open, import, insert, and attach a file as a worksession
1. | From the File menu, click Open or Import. |
2. | In the Open dialog box, select the supported file type. |
3. | If the import can be configured, click | to specify import settings.
4. | Click Open, or press Enter. |
Note: When Rhino opens a non-3dm model, the title bar reflects the name of the model that was opened. When the model is saved for the first time, this model name is entered as the file name.
另存或导出 Rhino 模型
1. | 从文件功能表选择导出选取的物件或另存文件。 |
2. | 在弹出的对话框的文件类型栏位清单会列出可以导出的文件类型。 |
3. | 在文件类型栏位选择文件类型。 |
4. | 在文件名称栏位输入文件名称。 |
5. | 设定保存的方式。 |
最小化保存
清除渲染、分析网格虽然可以让文件变小,但下次打开该文件时需要较多的时间重新计算渲染网格。
仅储存几何图形
只储存几何物件,不储存图层、材质、属性、附注与单位设定。
这个选项和导出物件很类似,使用这个选项储存时必需另存文件,储存的文件也不会成为目前 Rhino 打开的文件。
Save Textures
Embeds external textures used by materials, environments and decals into the model.
6. | 如果导出的文件类型有选项设定,可以按 | 按钮做设定。
7. | 如果导出的文件类型只能储存网格物件时,会弹出将 NURBS 转换为网格的网格转换设定对话框。 |
VDA 导出选项
寄件者信息
寄件者公司
寄件者姓名
电话号码
地址
部件信息
项目名称
物件代码
Variant
机密性
生效日期
收件者信息
公司名称
收件部门
将点集合偏差值指示线导出为 MDI
Always use these settings. Do not show this dialog again.
Saves the current settings and turns off the dialog display.
请参考