导出实体至 Spatial 的 ACIS .sat 原生文件格式。
另存或导出 Rhino 模型
1. | 从文件功能表选择导出选取的物件或另存文件。 |
2. | 在弹出的对话框的文件类型栏位清单会列出可以导出的文件类型。 |
3. | 在文件类型栏位选择文件类型。 |
4. | 在文件名称栏位输入文件名称。 |
5. | 设定保存的方式。 |
最小化保存
清除渲染、分析网格虽然可以让文件变小,但下次打开该文件时需要较多的时间重新计算渲染网格。
仅储存几何图形
只储存几何物件,不储存图层、材质、属性、附注与单位设定。
这个选项和导出物件很类似,使用这个选项储存时必需另存文件,储存的文件也不会成为目前 Rhino 打开的文件。
Save Textures
Embeds external textures used by materials, environments and decals into the model.
6. | 如果导出的文件类型有选项设定,可以按 | 按钮做设定。
7. | 如果导出的文件类型只能储存网格物件时,会弹出将 NURBS 转换为网格的网格转换设定对话框。 |
Always use these settings. Do not show this dialog again.
Saves the current settings and turns off the dialog display.
ACIS 导出类型
Default
ACIS version: 4.0
Curves are not exported
Curve knots and surface knots are clamped
Closed surfaces are split
ACIS 1.5
ACIS Version: 1.5
Exports curves
Curve knots and surface knots are clamped
Closed surfaces are split
ACIS 2.0
ACIS Version: 2.0
Exports curves
Curve knots and surface knots are clamped
Closed surfaces are split
ACIS 3.0
ACIS Version: 3.0
Exports curves
Curve knots and surface knots are clamped
Closed surfaces are split
ACIS 4.0
ACIS Version: 4.0
Exports curves
Curve knots and surface knots are clamped
Closed surfaces are split
AutoCAD
ACIS Version: 4.0
Exports curves
Curve knots and surface knots are clamped
Closed surfaces are split
Mechanical Desktop
ACIS Version: 4.0
Exports curves
Curve knots and surface knots are clamped
Closed surfaces are split
Inventor
ACIS Version: 4.0
Does not export curves
Curve knots and surface knots are clamped
Closed surfaces are split
Inventor 无法读取任何非实体的 ACIS 物件。
SOLIDWORKS
ACIS Version: 4.0
Does not export curves
Curve knots and surface knots are clamped
Closed surfaces are split
SOLIDWORKS ignores anything that is not a surface or a solid.
附注
● | Rhino 可以储存数种不同类型的 SAT 文件,所有的类型都可以导出曲线,但并不是所有程序都可以读取 ACIS 文件中的曲线。 |
● | 隐藏的物件会被略过。 |
请参考