Select a hatch pattern to fill the section.
Select None to make an open hole section.
The display color of the hatch pattern.
The color comes from the source that could be the object, layer, or clipping plane.
Select a color for the hatch pattern.
The rotation angle of the hatch pattern.
The scale factor of the hatch pattern.
The color fills the hatch boundary.
The color is based on Clipping Plane settings of the viewport display mode.
Draws the boundary curves of the hatch.
The linetype used by the boundary curves.
The scale factor of the linetype width.
The color comes from the source that could be the object, layer, or clipping plane.
Select a color for the boundary curve.
Fills the closed section on an open object.
The Contour and Section commands always create curves on objects, even though this option is disabled.
Restores the default settings.
Rhinoceros 8 © 2010-2024 Robert McNeel & Associates. 16-May-2024