TweenSurfaces

Toolbar Menu

Surface Tools

Surface

Tween Surfaces

 History enabled

The TweenSurfaces command creates intermediate surfaces between two input surfaces.

Steps

  1. Select the first surface.
  2. Select the second surface.
  3. Click the corner points to flip the u and v, or swap the u and v directions.

Command-line options

NumberOfSurfaces

Specifies the number of surfaces to create between the two input surfaces.

MatchMethod

Specifies the method for refining the output surfaces.

None

No refinement of the output surfaces is done. Control points of resulting surfaces are generated by connecting corresponding control points. Any extra control points are connected to the last control points of the surface with the smaller number of control points.

Refit

Refits the output surfaces like using the FitSrf command. The resulting surfaces are usually more complex than input unless input surfaces are compatible.

SamplePoints

Input surfaces are divided to the specified number of points (on curve), corresponding points define new points that output surfaces go through.

SampleNumber

The number of sample points to use.

See also

Edit surfaces

 

 

 

Rhino 6 for Mac © 2010-2020 Robert McNeel & Associates. 11-Nov-2020