SrfPtGrid

Toolbar Menu

Surface Creation
Surface Sidebar

Surface

Point Grid

The SrfPtGrid command draws a surface from a grid of points that lie on the surface.

Steps

  1. Type the number of points in each row.
  2. Type the number of points in each column.
  3. Type the point coordinates.
    You must type the grid control point coordinates one at a time and in order. This command is most useful when you have an ordered grid of control points in a text file and use it in conjunction with the ReadCommandFile command.
Command-line options

Closed

Closes the surface in one or both directions. The created surface closes in the direction whose point count is being requested.

Degree

Specifies the degree of the curve (or surface).

When drawing a high-degree curve, the output curve will not be the degree you request unless there is at least one more control point than the degree.

KeepPoints

Retains the point objects.

Example

The example is a command file to create an approximate cylinder. To see this example perform, select the following text, copy it, and run the Paste command.

! _SrfPtGrid
_KeepPoints
3
_Closed
6
0,-5,0
4.33,-2.5,0
4.33,2.5,0
0,5,0
-4.33,2.5,0
-4.33,-2.5,0
0,-5,5
4.33,-2.5,5
4.33,2.5,5
0,5,5
-4.33,2.5,5
-4.33,-2.5,5
0,-5,10
4.33,-2.5,10
4.33,2.5,10
0,5,10
-4.33,2.5,10
-4.33,-2.5,10

See also

Create surfaces

 

 

 

Rhino 6 for Mac © 2010-2020 Robert McNeel & Associates. 11-Nov-2020