MatchMeshEdge

Toolbar

Menu

Toolbar: Mesh Tools

Mesh

Mesh Repair Tools >

Match Mesh Edge

The MatchMeshEdge command moves face edges of an open mesh to meet adjacent face edges.

Note

First, the command will try to match vertices, then it will try to split edges to make the edges match.
No part of the mesh is moved more than the specified tolerance.
You can use this command either on the complete mesh or on selected edges.
When selecting a whole mesh, using a high tolerance can create unexpected results. Use larger tolerances only if you select specific edges to close.
Before edge matching, magenta edges are open.

Command-line options
PickEdges	Select specific edges to match.
DistanceToAdjust	Specify the tolerance distance.
RatchetMode	Matching the mesh takes place in four passes starting at a tolerance that is smaller than your specified tolerance and working up to the specified tolerance with successive passes. This matches small edges first and works up to larger edges.

Some STL/SLA printers have problems if meshes contain many long, thin facets. These facets can slow the printer down, produce odd results, or run the printer out of memory.
The MeshRepair command may be useful when tuning up meshes for STL/SLA printing.

See also

Edit mesh objects

Rhino 6 for Mac © 2010-2020 Robert McNeel & Associates. 11-Nov-2020