Shear

Toolbar Menu

Transform

Transform

Shear

The Shear command skews objects parallel to one axis at a specified angle.

A sheared rectangle, for example, is transformed into a parallelogram. The sides of the parallelogram will progressively lengthen as deformation proceeds but the top and bottom lines maintain their original length.

Steps

  1. Select objects.
  2. Pick the origin point.
    The base point does not move with the shear.
  3. Pick the reference point that defines the first point of the shear angle.
  4. Pick the shear angle.
Command-line options

Copy

 History enabled

Specifies whether or not the objects are copied. A plus sign appears at the cursor when copy mode is on.

The RememberCopyOptions command determines whether the selected option is used as the default.

Rigid

Specifies that individual objects will not be deformed as they are transformed.

The illustration shows the Rigid option with the Bend command.

Yes

Individual objects will not change, only their positions will change.

No

Individual objects are transformed as well as their positions.


Original objects (left), Rigid=No (center), Rigid=Yes (right).

SubCrv

Type subcrv to select part of a curve as input.

See also

Transform objects

 

 

 

Rhinoceros 6 © 2010-2020 Robert McNeel & Associates. 11-Nov-2020