MeshPatch

Toolbar Menu

Mesh Creation

Not on menus.

The MeshPatch command creates a polygon mesh from curves and points.

Steps

  1. Select curves and points.
  2. Select closed interior curves to be used to create holes in the mesh, or press Enter to create a mesh with no holes.
    Closed curves used as the inner boundary are treated as holes.
Command-line options

AngleTolerance

Used to make polyline approximations of curves. If only polylines are selected, this setting has no effect on the final output.

StartingSurface

Use a reference surface that is similar in shape to the mesh you are trying to create. The surface will influence the mesh shape.

See also

FillMeshHole

Fill a hole in a mesh.

FillMeshHoles

Fill all holes in a mesh.

Mesh

Create a mesh from a NURBS surface or polysurface.

Patch

Fit a surface through curves and point objects.

PatchSingleFace

Fill a mesh hole with a single mesh face.

 

 

 

Rhinoceros 6 © 2010-2019 Robert McNeel & Associates. 16-May-2019