Where can I find this command?
The SoftEditSrf command moves the surface area surrounding the selected point smoothly relative to the distance from selected point.
附註
| ● | Editing is done by moving the selected point. |
| ● | This location on the surface is moved, and the move is smoothly tapered off with increasing distance along the surface from this point. |
指令行選項
U距離/V距離
設定移動對曲面 U、V 兩個方向的影響範圍。
Copy
The Copy option specifies whether or not the objects are copied. A plus sign 
appears at the cursor when copy mode is on.
Note: The RememberCopyOptions command determines whether the selected option is used as the default.
固定邊緣
固定曲面邊緣的位置。
方向限制
限制移動的方向。
無
允許自由移動。
曲面法線
限制只能在曲面的法線方向上移動。
U正切
限制只能在曲面 U 方向的正切方向上移動。
V正切
限制只能在曲面 V 方向的正切方向上移動。
請參考
