FlowAlongSrf

History enabled.

FlowAlongSrf 指令可將物件從基準曲面對變至目標曲面。

步驟

1. 選取物件。
2. 點選基準曲面的角落處。
3. 點選目標曲面對應的角落處。

指令行選項

Copy

The Copy option specifies whether or not the objects are copied. A plus sign appears at the cursor when copy mode is on.

Note: The RememberCopyOptions command determines whether the selected option is used as the default.

硬性

The Rigid option specifies that individual objects will not be deformed as they are transformed.

The illustration shows the Rigid option with the Bend command.

Original objects (left), Rigid=No (center), Rigid=Yes (left).

Individual objects will not change, only their positions will change.

No

Individual objects are transformed as well as their positions.

平面

建立一個平面做為基準曲面。

Note: See the Rectangle command for detailed option descriptions.

請參考

使用通用變形工具 (UDT)