ExtractMeshPart 指令可抽離未熔接的個別網格。
Notes
● | Some STL/SLA printers have problems if meshes contain many long, thin facets. These can slow the printer's slicing process down, produce odd printed results, and run the printer out of memory. |
● | The MeshRepair command may be useful when tuning up meshes for STL/SLA printing. |
步驟
4 | 選取一個網格。 |
選項
EditSelection
Change which mesh faces are selected.
BorderOnly
Creates a border of the part only.
請參考