Where can I find this command?
The OrientOnCrv command moves or copies and rotates objects along a curve using the curve direction for orientation.
Steps
| 1. | Select objects. |
| 2. | Pick a base point. |
| 3. | Select the orientation curve. |
| 4. | Pick a new base point on the curve. |
Command-line options
Copy
The Copy option specifies whether or not the objects are copied. A plus sign 
appears at the cursor when copy mode is on.
Note: The RememberCopyOptions command determines whether the selected option is used as the default.
Perpendicular
Orients the object perpendicular to the curve. The perpendicular plane is determined by the current construction plane when the base point is picked.
XFlip/YFlip
Reverses the orientation relative to the original orientation to the construction plane
Rotate
Pick an angle or two reference points to rotate the curve.
See also
Transform objects using two reference and two target points.
Transform objects using three reference and three target points.
Copy and align a curve to a surface edge.
Transform objects normal to a surface.
Rhinoceros 5 © 2010-2015 Robert McNeel & Associates. 17-Sep-2015
