The Orient3Pt command moves or copies and rotates objects using three reference and three target points.
Steps
1. | Select the objects. |
2. | Pick the first reference point. |
3. | Pick the second reference point. This defines a base direction from the first reference point. |
4. | Pick the third reference point. |
5. | Pick the first target point. This corresponds to the first reference point. |
6. | Pick the second target point. This corresponds to the second reference point. |
7. | Pick the third target point. This corresponds to the third reference point. |
Command-line option
Copy
The Copy option specifies whether or not the objects are copied. A plus sign appears at the cursor when copy mode is on.
Note: The RememberCopyOptions command determines whether the selected option is used as the default.
See also
Transform objects using two reference and two target points.
Copy and align a curve to a surface edge.
Transform objects along a curve normal.
Transform objects normal to a surface.
Rhinoceros 5 © 2010-2015 Robert McNeel & Associates. 17-Sep-2015