Where can I find this command?
The Copy command makes duplicates of the selected objects.
步驟
| 1. | 選取物件。 |
| 2. | 指定物件複製的起點。 |
| 3. | 指定物件複製的終點。 |
| 4. | 按 Enter 結束指令。 |
附註：如果選取的物件是群組內的物件, 複製得到的新物件不屬於原來的群組，而是屬於另一個新的群組。
指令行選項
垂直
往目前工作平面垂直的方向複製物件。
在與選取的物件同樣的位置複製物件。
從上一個點=是/否
The Yes option uses the point the last object was copied to as the base point.
The No option uses the first base point as location to copy from.
使用上一個距離=是/否
The Yes option places the next copy at the same distance from the base point as the last copy.
The No option allows a new distance for the next copy.
使用上一個方向=是/否
The Yes option places the next copy at the same angle from the base point as the last copy.
The No option allows a new direction for the next copy.
請參考
在物件上顯示可以對物件做移動、縮放、旋轉的控制項。
History enabled.