SoftEditCrv

Toolbar Menu

Move
Transform

Curve

Curve Edit Tools >

Soft Edit

The SoftEditCrv command moves the curve area surrounding a selected point smoothly relative to the distance from selected point.

Note

Steps

  1. Select a curve.
  2. Pick a point on the curve.
  3. Pick a point to move to.
  4. Press Enter to end the command.

Note

Command-line options

Distance

The distance, in model units, along the curve from the editing point over which the strength of the editing falls off smoothly.

Either enter a value or click on the curve to set the distance.

Copy

Specifies whether or not the objects are copied. A plus sign appears at the cursor when copy mode is on. The RememberCopyOptions command determines whether the selected option is used as the default.

FixEnds

Determines whether or not the position of the curve ends is fixed.

No

If the Distance value is larger than the distance to one or both ends of the curve, the end of the curve will be allowed to move.

Yes

If the Distance value is larger than the distance to one or both ends of the curve, the end of the curve will not be allowed to move.

With the Yes option, all control points are moved as they would be according to the normal falloff except the end control points. This can lead to an abrupt change in the curve near the end on dense curves.

See also

Edit curves

 

 

 

Rhino for Mac © 2010-2017 Robert McNeel & Associates. 24-Oct-2017