Contour

Toolbar Menu

Curve from Object

Curve

Curve From Objects >

Contour

The Contour command creates a spaced series of planar curves and points resulting from the intersection of a defined cutting planes through curves, surfaces, polysurfaces, or meshes.

Steps

  1. Select objects for contour creation.
  2. Pick the base point.
    One of the contour planes will go through this point. The contour curves and points are created from the intersections of a series of invisible parallel planes cutting through the selected object.
  3. Pick a direction perpendicular to the contour planes.
    The contour planes will be generated in both directions from the base point and will be perpendicular to the picked direction.
  4. Specify the distance between contours and press Enter.
    This will create contour curves where the contour planes intersect the selected surfaces and polysurfaces and points where the contour planes intersect the selected curves.
Command-line options

AssignLayersBy

Specifies the layer for the contour curves and points.

CurrentLayer

The output will be on the current layer.

InputObject

Contour curves and points will be on the same layer as the input objects.

GroupObjectsByContourPlane

Specifies whether or not contour on the same contour plane will be grouped.

JoinCurves

Specifies how contour curves created from polysurfaces will be joined.

ByPolysurface

Curves in the same contour plane created from a polysurface will be joined.

ByContourPlane

All curves in the same contour plane will be joined.

None

No curve joining.

Range

Specifies limits for the contours.

Steps

  1. Select objects for contour creation.
  2. Pick the start for the contour curves and points.
  3. Pick the end of the contour range perpendicular to the contour planes.
    The range line determines the direction for the contours curves.
    The contour planes will be perpendicular to this direction, generated from the base point to the end point.
  4. Specify the distance between contours and press Enter.
    Contour curves are created where the contour planes intersect the objects.

Section

Toolbar Menu

Curve from Object

Curve

Curve From Objects >

Section

The Section command creates a planar curve or points resulting from the intersection of a defined cutting plane through objects.

Steps

  1. Select objects.
  2. Pick the start of the section plane.
  3. Pick the end of the section.
    Section curves and points are created by intersecting the selected objects with the section plane, which is perpendicular to the construction plane.
  4. Press Enter when you finish creating sections.
Command-line options

AssignLayersBy

Specifies the layer for the section curves and points.

CurrentLayer

The output will be on the current layer.

InputObject

Section curves and points will be on the same layer as the input objects.

GroupObjectsBySectionPlane

Specifies whether or not the section curves on the same section plane will be grouped.

JoinCurves

Specifies how section curves created from polysurfaces will be joined.

ByPolysurface

Curves in the same section plane created from a polysurface will be joined.

BySectionPlane

All curves in the same section plane will be joined.

None

No curve joining.

ExtendSection

Specifies whether or not the section curves will automatically be created for all selected objects as though the drawn section plane extended through them.

See also

Create curves from other objects

 

 

 

Rhino for Mac © 2010-2017 Robert McNeel & Associates. 24-Oct-2017