MeshPlane
Toolbar | Menu |
---|---|
|
Mesh Polygon Mesh Primitives > Plane |
The MeshPlane command draws a rectangular polygon mesh plane.
Steps
-
Pick two points for the opposite corners of a rectangle.
Or, select one of the options to draw the rectangle in a different way.
-
Specify the face numbers in X and Y directions.
Command-line options
(Default)
Draws the rectangle using two opposite corners.
3Point
Draws the rectangle using two adjacent corner locations and a location on the opposite side.
EdgeMidpoint
Draws the rectangle from the midpoint of the first edge, an end of the edge, and a location on the opposite side.
Vertical
Draws the rectangle perpendicular to the construction plane.
Center
Draws the rectangle from the center point and a corner.
AroundCurve
Draws a rectangle perpendicular to a curve.
XCount
The number of faces in the x direction.
YCount
The number of faces in the y direction.
-
Type a number other than 0 and press Enter to set the same number for both directions. Typing 0 picks a point at the current CPlane origin.
See also
![](../image/command_icons/3dface.png)
3DFace
Creates mesh or SubD faces that can be standalone or added to an existing mesh or SubD.
![](../image/command_icons/plane.png)
Plane
Draw a rectangular planar surface.
![](../image/command_icons/subdplane.png)
SubDPlane
Creates a subdivision plane object.
![](../image/command_icons/mesh.png)
Mesh
Create a mesh from a NURBS surface or polysurface.