Transform
Orient >
On Curve
| Toolbar | Menu |
|---|---|
|
|
Transform Orient > On Curve |
The OrientOnCrv command moves or copies and rotates objects along a curve using the curve direction for orientation.
Command-line options
Pick a base point on the curve. This allows moving the object along the curve while maintaining its orientation to the curve.
Specifies whether or not the objects are copied. A plus sign 
appears at the cursor when copy mode is on.
The RememberCopyOptions command determines whether the selected option is used as the default.
Orients the object perpendicular to the curve. The perpendicular plane is determined by the current construction plane when the base point is picked.
Reverses the orientation relative to the original orientation to the construction plane
Enter an angle or pick two reference points to rotate the object.
Type subcrv to select part of a curve as input.
Orient
Transform objects using two reference and two target points.
Orient3Pt
Transform objects using three reference and three target points.
OrientCrvToEdge
Copy and align a curve to a surface edge.
OrientOnSrf
Transform objects normal to a surface.
Rhino 6 for Mac © 2010-2020 Robert McNeel & Associates. 11-Nov-2020
