FilletEdge

FilletEdge

Toolbar	Menu
Solid Tools	Solid Fillet Edge > Fillet Edge

Toolbar

Toolbar: Solid Tools

Solid

Fillet Edge >

Fillet Edge

The FilletEdge command creates a tangent surface between polysurface edges with varying radius values then trims and joins the original faces to the fillet surfaces.

Input supported
Polysurface/Extrusion edges.

Input supported

Polysurface/Extrusion edges.

Steps

Select edges.
Select handles.

Note

Moving a handle at the end of the edge will cause the fillet to extend beyond the surface. This will have to be trimmed by other means.

Use window or Shift + mouse click to select multiple handles.

Command-line options
ShowRadius	Yes Displays radius handles in the viewport. No Hides radius handles in the viewport. A hidden radius handle will display when the mouse cursor is close to it.
NextRadius	Specifies the radius for the next edge.
ChainEdges	Automatically selects connected edges based on continuity. How to chain select edges.
FaceEdges	Pick a face to select its boundary edges. Tangent edges are excluded.
PreviousEdgeSelection	In cases where the command is canceled or ended prematurely, the PreviousEdgeSelection option re-selects the previously selected edges. Supports multiple sets of previously selected edges for up 20 previous edge sets.
TrimAndJoin	Trims and joins the resulting surface to the input surfaces. History only works if TrimAndJoin=No.
SelectEdges	Allows selecting more edges after the selection has been closed.
Preview	Displays a dynamic preview. You can change the options and the preview will update.
Edit	Edit the most recent selected set of edges. To edit edges Select the object to edit. The editable edges highlight. Use Shift+click to add edges. Use Command+click to remove edges. Edit the size of the handles. Remove all edges in the most recent edge set to return to the previous edge set. 1) The first edge set. 2) The second edge set. 3) Remove all edges in the second edge set if you need to edit the first edge set.

Command-line options

ShowRadius

Yes

Displays radius handles in the viewport.

No

Hides radius handles in the viewport. A hidden radius handle will display when the mouse cursor is close to it.

NextRadius

Specifies the radius for the next edge.

ChainEdges

Automatically selects connected edges based on continuity.

How to chain select edges.

FaceEdges

Pick a face to select its boundary edges. Tangent edges are excluded.

PreviousEdgeSelection

In cases where the command is canceled or ended prematurely, the PreviousEdgeSelection option re-selects the previously selected edges. Supports multiple sets of previously selected edges for up 20 previous edge sets.

TrimAndJoin

Trims and joins the resulting surface to the input surfaces.

History only works if TrimAndJoin=No.

SelectEdges

Allows selecting more edges after the selection has been closed.

Preview

Displays a dynamic preview. You can change the options and the preview will update.

Edit

Edit the most recent selected set of edges.

To edit edges

Select the object to edit. The editable edges highlight.
Use Shift+click to add edges. Use Command+click to remove edges.
Edit the size of the handles.

Remove all edges in the most recent edge set to return to the previous edge set.

1) The first edge set. 2) The second edge set.

3) Remove all edges in the second edge set if you need to edit the first edge set.

The Radius and Distance options appear on the command line when you drag a handle grip.

Radius/Distance options
FromCurve	Select a curve. The radius of the curve at the picked location will be used.
FromTwoPoints	Pick two points to show the radius distance.

Handle options
AddHandle	Adds a handle along the edges.
CopyHandle	Adds a new handle using the distance from the selected handle.
RemoveHandle	Visible only when at least one handle has been added.
SetAll	Sets the distance or radius for all handles.
LinkHandles	Editing a single handle updates all handles.

Note

Only added handles can be removed.
The default handles at the ends of each open edge segment cannot be moved or deleted. This is the minimum information the command needs in order to work.
The handle at the end of a single closed edge can be moved but not deleted.

RailType options
DistFromEdge	The distance from the edge curves determines the intersection.
RollingBall	The radius of a rolling ball determines the intersection.
DistBetweenRails	The distance between the edge rails determines the intersection.

RailType options

DistFromEdge

The distance from the edge curves determines the intersection.

RollingBall

The radius of a rolling ball determines the intersection.

DistBetweenRails

The distance between the edge rails determines the intersection.

Tips

Always fillet from the largest radius to the smallest radius across a model.

Remove any edges you can prior to filleting with MergeAllFaces or by way of surfacing in a simpler manner. Fewer intersected edges = Fewer problems as the fillet rolls along any edges and tries to trim and join with the adjacent surfaces.

Make sure there is enough room for the fillet surface to trim and join with adjacent surfaces. The angle relationships between surfaces, sharpness of the bend in the rail around corners and rail type all play a part in any particular case.

Steps

Note

Yes

No

To edit edges

Note

Tips

See also