ExtrudeSrfToPoint

Toolbar	Menu
Extrude Solid	Solid Extrude Surface> Extrude Surface to Boundary> To Point

Toolbar

Toolbar: Extrude Solid

Solid

Extrude Surface>

Extrude Surface to Boundary>

To Point

The ExtrudeSrfToPoint command creates a solid by tracing the path of the surface edges tapering to converge at a selected point.

A planar surface extrudes vertically to the surface plane by default. If the surface is not planar, the default extrusion direction is the z direction of the active CPlane.
The extrusion preview direction in the viewport defines the positive direction for distance input.

Command-line options
Solid	If the profile curve is closed and planar, both ends of the extruded object are filled with planar surfaces and joined to make a closed polysurface.
DeleteInput	Yes Deletes the original geometry. No Retains the original geometry.
ToBoundary	Extrudes the object to a boundary surface.

Command-line options

Solid

If the profile curve is closed and planar, both ends of the extruded object are filled with planar surfaces and joined to make a closed polysurface.

DeleteInput

Deletes the original geometry.

Retains the original geometry.

ToBoundary

Extrudes the object to a boundary surface.

See also