ExtrudeCrvAlongCrv

Toolbar Menu

Extrude
Extrude Solid
Surface Creation
Surface Sidebar

Solid

Extrude Planar Curve >

Along Curve

Surface

Extrude Curve >

Along Curve

 History enabled

 Crease splitting enabled

The ExtrudeCrvAlongCrv command creates a surface by tracing the path of a curve along another path curve.

Steps

  1. Select a curve.
  2. Select the path curve.

Command-line options

Solid

If the profile curve is closed and planar, both ends of the extruded object are filled with planar surfaces and joined to make a closed polysurface.

DeleteInput
Yes

Deletes the input object.

No

Keeps the input object.

SubCurve

Extrudes a curve the distance specified by picking two points along a curve.

The extruded surface starts from the beginning of the curve, not the first picked point. Picking the points only establishes the extrusion distance.

Steps

  1. Select the path curve.
  2. Pick a start along the path curve.
  3. Pick an end along the path curve.
SplitAtTangents

This option is not available when the UseExtrusions command is set to Extrusion which is by default.

Yes

Tangent points on the input curve extrude as joined edges.

No

Tangent points on the input curve extrude as surface kinks.

Wikipedia: Tangent

See also

Extrude curves and surfaces

 

 

 

Rhino 6 for Mac © 2010-2020 Robert McNeel & Associates. 11-Nov-2020