EarthAnchorPoint

Toolbar Menu

Tools

Not on menus.

The EarthAnchorPoint command adds information to the model about the model's position in latitude, longitude, and elevation for GIS mapping applications.

Steps

  1. Enter the earth location.
  2. Select a model point that corresponds to the earth location.
  3. Select North.
  4. Select East.
  5. Type identification information.
Command-line options

Latitude

Sets the latitude for the location.

Longitude

Sets the longitude for the location.

Elevation

Sets the elevation for the location.

Identification (optional)

Name

URL

URL_tag

Description

Example

The EarthAnchorPoint command gives the ability to write Google Earth models. You can model an object, save it as a Google Earth file (.kml file), and then use Google Earth to view the model.

To do this, Rhino needs know how to position the model on the earth. Every model has an "Earth Anchor Point" that contains all the information that is needed to position the model on the earth. The earth anchor point for the Seattle Rhino headquarters might contain this information:

Earth anchor point location

Latitude: 47° 39' 08.54"N (47.653395°)

Longitude: 122° 20' 37.30"W (-122.34384°)

Elevation: 0 (the building is on the ground)

Given that a minute of longitude is roughly 6,000 feet at sea level, then a second would be about 100', and a hundredth of second, about a foot.

Model orientation

Basepoint = (0,0,0) model origin is the southwest corner of the building.

North = (0,1,0) y axis points north.

East = (1,0,0) x axis points east.

Identification (optional)

Name: McNeel HQ

Description:

URL: http://www.rhino3d.com

URL tag: Rhino

See also

Utility functions

 

 

 

Rhino 6 for Mac © 2010-2020 Robert McNeel & Associates. 11-Nov-2020