| Barre d'outils | Menu |
|---|---|
|
|
|
La commande Grasshopper ouvre la fenêtre du module Grasshopper®. Grasshopper est un éditeur graphique d'algorithmes intégré dans les outils de modélisation 3D de Rhino.
Charge le module Grasshopper et contrôle la visibilité de la fenêtre de Grasshopper.
Load |
Charge le module Grasshopper mais n'ouvre pas la fenêtre de Grasshopper. |
Show |
Ouvre la fenêtre de Grasshopper. Le module Grasshopper sera chargé si ce n'est pas le cas. |
Hide |
Cache la fenêtre de Grasshopper lorsqu'elle est ouverte. |
Toggle |
Change la visibilité de la fenêtre de Grasshopper. |
Open |
Permet de naviguer ou d'entrer le chemin vers un fichier Grasshopper (*.gh, *.ghx) pour l'ouvrir. |
Save |
Enregistre le fichier actuel de Grasshopper. |
SaveAs |
Enregistre la le fichier de Grasshopper actuel sous un autre nom. |
Close |
Ferme le fichier de Grasshopper en cours. Toutes les données non enregistrées seront perdues. |
CloseAll |
Ferme tous les fichiers de Grasshopper ouverts. Toutes les données non enregistrées seront perdues. |
Enable |
Déverrouille le solver de Grasshopper. Grasshopper resumes computing interactive data. |
Disable |
Locks the Grasshopper solver. Grasshopper stops computing interactive data. |
Toggle |
Changes the locking status of the Grasshopper solver. |
Changes visibility of the Grasshopper banner when the scriptable version command, -Grasshopper, is loading the Grasshopper plug-in.
Enable |
Shows the Grasshopper banner. |
Disable |
Hides the Grasshopper banner. |
There are two different ways to hide plug-ins from Grasshopper for Rhino 5 and Rhino 6 respectively.
Place V6 GH plug-ins in %APPDATA%\Grasshopper\6\Libraries where GH for Rhino 5 does not look. Or place them next to a Rhino plug-in .rhp file that only loads in Rhino 6.
| Barre d'outils | Menu |
|---|---|
|
|
|
The GrasshopperDeveloperSettings command manages Grasshopper plug-in (*.gha) loading behavior and locations. There are better functionalities in the current Grasshopper that can entirely replace this command.
Windows systems do not allow loading DLL files from "unsafe" locations such as network drives. When checked, plugin files are first read from the disk into memory, and then loaded from memory into the application. This option makes it possible to load a plug-in stored on a server. It is not recommended to change this option. There are now better ways to set per plug-in loading behavior in Grasshopper (File > Preferences > Solver > Plug-in loading).
Click to add an extra folder from where *.gha files will be loaded in addition to the default locations. Plug-in developers can add the Visual Studio build folder and load *.gha files from there.
Click to show the folders from where Grasshopper attempts to load plug-ins. You cannot edit the list, but the list can help to find the location of specific plug-ins.
Make Grasshopper ignore a plug-in
| Barre d'outils | Menu |
|---|---|
|
|
|
The GrasshopperFolders command opens the folders where Grasshopper stores files of settings, user objects, clusters or components.
| Barre d'outils | Menu |
|---|---|
|
|
|
The GrasshopperGetSDKDocumentation command downloads the Grasshopper SDK help document (.CHM) from the Internet.
| Barre d'outils | Menu |
|---|---|
|
|
|
The GrasshopperIgnorePlugin command allows selecting a .gha file that will be ignored by Grasshopper. A *.no6 file is created beside the .gha file that tells Grasshopper not to load it.
Run the command.
Select a .gha file.
If the .gha file is in a folder that you do not have full control, you will have to run Rhino by right-clicking on the Rhino desktop icon and select "Run as administrator," otherwise the *.no6 file cannot be created.
Delete the *.no6 file beside the ignored .gha file.
| Barre d'outils | Menu |
|---|---|
|
|
|
La commande GrasshopperLoadOneByOne demande avant le chargement de chaque module. Utilisez cette commande pour trouver le modèle qui fait planter Grasshopper au démarrage.
Rhinoceros 6 © 2010-2019 Robert McNeel & Associates. 29-juil.-2019
