ACIS (.sat) 匯出

匯出實體至 Spatial 的 ACIS .sat 原生檔案格式。

另存或匯出 Rhino 模型

1. From the File menu, click Export Selected or Save As.
2. 彈出的對話框的檔案類型欄位清單會列出可以匯出的檔案類型。
3. 在檔案類型欄位選擇檔案類型。
4. 在檔案名稱欄位輸入名稱。
5. 設定儲存的方式。

最小化儲存

清除彩現、分析網格雖然可以讓檔案變小，但下次開啟該檔案時需要較多的時間重新計算彩現網格。

僅儲存幾何圖形

只儲存幾何物件，不儲存圖層、材質、內容、附註與單位設定。

這個選項和匯出物件很類似，使用這個選項儲存時必需另存檔案，儲存的檔案也不會成為目前 Rhino 開啟的檔案。

儲存貼圖

Embeds external textures used by materials, environments and decals into the model.

6. If the export can be configured, click Options to specify export settings.
7. 如果匯出的檔案類型只能儲存網格物件時，會彈出將 NURBS 轉換為網格的網格轉換設定對話框。

總是使用這些設定，不要再彈出此對話框。

儲存目前的設定，以後不用彈出設定對話框直接匯出檔案。

恢復彈出設定對話框

4 Click Options in the appropriate Save, Export, Open, Import, or Insert dialog box.

ACIS 匯出類型

預設值

ACIS version: 4.0
Curves are not exported
Curve knots and surface knots are clamped
Closed surfaces are split

ACIS 1.5

ACIS Version: 1.5
Exports curves
Curve knots and surface knots are clamped
Closed surfaces are split

ACIS 2.0

ACIS Version: 2.0
Exports curves
Curve knots and surface knots are clamped
Closed surfaces are split

ACIS 3.0

ACIS Version: 3.0
Exports curves
Curve knots and surface knots are clamped
Closed surfaces are split

ACIS 4.0

ACIS Version: 4.0
Exports curves
Curve knots and surface knots are clamped
Closed surfaces are split

AutoCAD

ACIS Version: 4.0
Exports curves
Curve knots and surface knots are clamped
Closed surfaces are split

Mechanical Desktop

ACIS Version: 4.0
Exports curves
Curve knots and surface knots are clamped
Closed surfaces are split

Inventor

ACIS Version: 4.0
Does not export curves
Curve knots and surface knots are clamped
Closed surfaces are split

Inventor 無法讀取任何非實體的 ACIS 物件。

SolidWorks

ACIS Version: 4.0
Does not export curves
Curve knots and surface knots are clamped
Closed surfaces are split

SolidWorks 會忽略所有非曲面及實體的物件。

附註

● Rhino 可以儲存數種不同類型的 SAT 檔案，所有的類型都可以匯出曲線，但並不是所有程式都可以讀取 ACIS 檔案中的曲線。
● 隱藏的物件會被略過。

請參考

Wikipedia: ACIS