PatchSingleFace 指令以單一網格面橋接外露的網格面邊緣。
Notes
● | Some STL/SLA printers have problems if meshes contain many long, thin facets. These can slow the printer's slicing process down, produce odd printed results, and run the printer out of memory. |
● | The MeshRepair command may be useful when tuning up meshes for STL/SLA printing. |
步驟
4 | 選取兩個網格邊緣或數個網格頂點。 |
指令行選項
組合網格
將用來填補洞的網格面與原來的網格組合。
請參考